Honeywell P658F1000 Pneumatic Electric Switch - /U p658-5

"PANEL MOUNT

Panel mount.

The Honeywell P658F1000 is a pneumatic panel mount switch that operates on 27-30VDC. This "A" Frame mounted timer switch features a master start pushbutton that two, five minute time delay indicators. This industrial panel mount timer switch comes with an adjustable shut off and run timer lever.

This is a single-phase grate that senses the change in pressure on the object that is being weighed to determine if it meets or exceeds the trigger weight. Panel mount switches are typically used for industrial applications and occasionally in commercial settings, where they can be installed inside of a control panel.

The P658F1000 is a pneumatic electric switch with an upstroke time of typically 1.5 seconds and a downstroke time of typically 3.5 seconds. It is suitable for controlling large air volumes and liquids requiring little or no clearance between control and actuator due to its compact size. It also has an optional built-in magnetic switch capable being actuated by others than the bottom magnet, such as a piece of sheet metal or glass door. This option can also be used when there is no room on the panel for the magnet for actuation."

Air control switch for dry single-phase motor. Rotates continuously in both directions. All contacts are NC rated except the ground. For general occupancy and fire alarm signal applications, where a combination of manual and local automatic signaling devices is needed."

The P658 is a pneumatic switch that is spring-return and pressure sensitive. The P658 has a stainless steel shaft, chrome plated brass housing, and has a delicate release that prevents accidental tripping during opening or closing of the door. It is NEMA 1 rated. The P658 measures 3/4" high and 2-3/4" wide.

Tired of forgetting to turn off the lights? Installing a switchplate couldn't be easier, we provide screws and anchors for a fast secure installation. Works with all our Honeywell Photocells.