Honeywell RP7517B1016 Electronic Pneumatic Transducer

E/P TRANSDUCER

The Honeywell Electronic/Pneumatic Transducer measures and displays pressure, volume flowrate, and temperature from 0 to 10 psig. It includes a dynamic signal via RS-485 or 0-5 VDC serial output. This transducer is intended for 4-20 mA operation as part of a process control system with custom built dynamic signal generators.

Electronic, pneumatic transducer with 0 to 10 psi (0 to 7 bar) or 4 to 20 mA outputs for measuring pressure and vacuum in air and liquid systems. Featuring Honeywell's exclusive linearization circuit, the RP7517B1016 unit provides accurate readings even from a zero point. Compact, rugged design for improved flow regulation and system control applications.

This transducer is an economical choice for many non-contact sensing applications. This unit's high resolution, low profile and small foot print make it ideal for closed environment sensing applications. Featuring high accuracy and linearity over its specified temperature range, this sensor is designed with a polyurethane diaphragm encapsulated in a rugged metal casing. The 10 to 30VDC output signal is proportional to the measured pressure . Typically, when pressure is applied to the transducer the fluid/gas flows out of the flexible silicone point contact membrane which changes the pressure on the diaphragm causing rotation of the magnet

Our electronic air pressure transducer measures negative and positive changes in air pressure. The Honeywell Transducer works with the Honeywell Control (Mr. Slim) to provide you with high quality thermostat performance. This precision air pressure sensor has a maximum range of 300psi (-150psi to 900psi).

Keep your doors closed - and save energy. The Honeywell RP7517B1016 Electronic Pneumatic Transducer automatically increases or decreases the pressure within your home's heating system to automatically balance out demand, reducing your carbon footprint. And with a Z-wave compatible Smart tech construction, you can control devices in your home via app on your smartphone or tablet whenever you're away from home.

The Honeywell RP7517B1016 electronic pneumatic transducer has a solid state, stainless steel construction with gasketed inlet and outlet ports. The brass stem has a 3/4 in NPT male connection on both ends for connecting to a manifold or tee. This transducer is designed for use on positive displacement metering pump applications.

The Honeywell RP7517B1016 electronic pneumatic transducer converts a pressure signal to a corresponding 4-20 mA signal with signal accuracy of ±0.08%. It has a maximum voltage output of 15 VDC, and the current output can be set from 0-20mA, 2-20mA, or 4-20mA. It is designed for use in air, oil, or vacuum.