Honeywell V4043A1010 Electric Zone Valve 120V 2WAY ZONE VALVE 1/2" SWEAT, N/C, 3.5CV, 20PI

V4043A-1010 ZONE VALVE HONEYWELL 1/2 SWEAT 120V 2-WAY

Honeywell Zone valve with 1/2 inch sweat terminals. . ZONE VALVE HONEYWELL 1/2 SWEAT 120V 2-WAY. V4043A-1010

The Honeywell V4043A-1010 ZONE VALVE is an electronically controlled 2-way valve designed for use with electric equipment. The valve features 1/2 in sweat connections and a paddle lever actuator.

The Honeywell Zone Valve is a 2-way Zone Valve with 1/2" Sweat connections. It is designed as a booster valve to  increase flow to a group of valves or zoned water system. The valve has isolator switches that prevent simultaneous operation of both valves. The V4043A1010 Zone Valve provides reliable, constant pressure to the valve outlets in which it is placed, allowing  the zone valves to perform at optimal capacities, reducing unneeded water usage and wasted energy associated with high pressure scenes. This Zone Valve has polypropylene molded bonnets, stems, and trim that

The V4043A-1010 electric zone valve from Honeywell allows you to zone heating or cooling in two different areas of your home. This electric zone valve is UL listed and CSA Certified to ensure that it meets safety standards. It operates on 120V AC 50/60Hz single phase, has an operating temperature range of 41 degrees to 95 degrees F, total pipe length not to exceed 10', and a crimped copper tailpiece with sweat connection. The zone valve is made with NEMA 1 cast iron and designed for use with T-bar pine 2-1/2" flex pipe for 1/2

This Honeywell V4043A-1010 electric zone valve controls the flow of steam and/or condensate return at a branch point in a steam heating system. It is suitable for use in new and replacement installations, or as a replacement for worn out zone valves. The valve has a 2-way operation (handle can be positioned in either horizontal or vertical position).

Honeywell HVAC Zone Valves V4043A-1010

Easily adjust the heating and cooling in your home with this Honeywell Zone Valve. It features a 1/2 inch sweat connection for quick installation and requires a low voltage control system.