Honeywell V4055A1007 Fluid Power Gas Valve Actuator, On-Off, 120 VAC, 60 Hz

120V FLUID POWER ACTUATOR 26 SECOND OPENING

Honeywell V4055A1007 Fluid Power Gas Valve Actuator. 120V FLUID POWER ACTUATOR 26 SECOND OPENING. Honeywell Model # V4055A1007, Fluid Power Gas Valve Actuator, On-Off 120 volt AC, 60Hz....

On-Off Actuator, Fluid Power, 120 VAC, 60 Hz, 1 NC, 0.5A Maximum The V4055A1007 is a 120 volt Oil Sealed Hydraulic On-Off Actuator capable of 26 second opening times. The oil-sealed version of this actuator is covered by Honeywell Part Number: V4055A1008. With DC electrical control the actuator can be switched controlled by 0-10V or 4-

The Flow Control Gas Valve Actuator reduces the pressure of gas from a commercial propane tank. It provides 26 seconds of uninterrupted open flow. The valve is controlled by a simple, two knob operation and can handle up to 75 psi of pressure with a 15 or 20 ft. long output hose. The actuator has to be connected to a ••••• 2 in. high pressure outlet through an adjustable regulator (not included).

The Honeywell V4055A1007 fluid power gas actuator provides positive positioning of valves in the air conditioning and refrigeration industry. Made of aluminum, this device may be utilized for many functions such as modulating valves, circulating air flow, opening a vent and much more. This actuator delivers a maximum pressure of 10 PSI and flows up to 26 SCFM. Its flange mount design makes it easy to install on pressurized lines.

The Honeywell V4055A1007 is a fluid power gas valve actuator that comes with a single speed on-off feature to control the flow of fluids. This is an electronic, pneumatic type valve that is capable of modulating high-speed gas flows with compatible valves and several compatible Honeywell control valves. It is great for use in coal mines, air compressor systems, refrigeration and cold storage facilities, dryers, ovens and anywhere pneumatic control valves are needed.

Designed for use with single acting, internal check, position control valves and actuators. Can be mounted vertically or horizontally in panel or display applications (panel mount not available with key override models). Self-contained valve position return springs ensure reliable valve/actuator performance. Three way, normally closed contact used to indicate: Power on/fail, Device ready and Fault conditions. Single Phase input, output less than 250VA @120V. UL/cUL listed.