Honeywell VBN2BJPX5000 "3/4""NPT 2W 7.4Cv PROP NSR 24V"

"3/4""NPT 2W 7.4Cv PROP NSR 24V"

The Honeywell VBN2BJPX5000 "3/4""NPT 2W 7.4Cv PROP NSR 24V" is the ideal product for you. This unit, part number VBN2BJPX5000 , comes brand new in its original box. Be sure to look for any scratches or dents that may have occurred during shipping.

The VBN2BJPX5000 is a 3/4""NPT, 2W, 7.4 CV 26.6 W, 115/230V, 1740 spm AC motor drive propane solenoid valve with 24 VDC coil. The valve provides adjustment of the pilot signal in response to the flow conditions downstream of the device controlled and the pilot signal provided by the control device.

A low-profile, compact, pressure drop regulator with a unique light weight design. Also features: 1/4 in. NPT outlet; 7.48 Cv, Ns, 24 Vdc; 2 W output power rating; 0.375 in. A inlet size; 304 stainless steel construction; a high-temperature Type C safety ring for use only with HONEYWELL/PONAM 24 V DC units

This 7.4V 2W 24V NPT electric solenoid valve is a flow control device used to activate and deactivate a pneumatic or hydraulic process through a control signal or current. The power source requires 24V DC. Three (3) pin terminals are located on the neck of the coil unit and are accessible from outside the valve body to permit fast connection with the field wiring. This includes a 24 VAC polarized, spring lock-in connector to make the electrical connections between coil and power source. A 90 degree throw handle is located on top of the body for easy manual operation and for mounting access

This 24V 1/4 in. 2-Watt proximity sensor, ideal for a wide range of industrial and commercial applications, has no moving parts. Safe from the threat of liquid immersion and impact, it is rated for Class I, Division 2 hazardous locations. It utilizes a solid state relay to switch on/off the equipment when the proximity sensor is activated or deactivated. The NPN output relay contacts are rated at 12 A @ 120 VAC and 18 A @ 24 VAC. The switching sensitivity can be adjusted from 5mm to 10cm based on application requirements.

The Honeywell 2-Wire 7.4 Amp Regulator/Overcurrent Protection Device is a two wire, 24 volt, normally closed pressure operated safety device designed for use with factory installed solenoid valve and is used to provide a trip indication as a part of an alarm system or process control system. It also features an integral field-proven integral thermal protective shut down, and resettable outlet reset feature.

The Honeywell VBN2BJPX5000 2/4-Watt Peak, 7.4-Volt DC npn transistor is a surface-mount silicon transistor with an integral heat sink for applications in generators, pumps, and motor controls where space is a concern. The high-quality NPN structure provides superior performance in the harshest environments. This ceramic transistor comes in a compact case, allowing it to fit into tight installation spaces.