Honeywell VCZMA6100 "1/2""Sw 3way 3.8cv for VC Act" "1/2""Sw 3way 3.8cv for VC Act"

"1/2""Sw 3way 3.8cv for VC Act"

This Vac/Char 3.8-cv motor starter is ideal for high cycle automation, and comes equipped with a 25-Amp Silicon Carbide (SiC) thermal overload. This product is rated for voltages 1/2"Sw 3way 6.0-cv and 1/2"Sw 3way 8.0-cv

Actuator, three-way, 3.8 Cv pressure differential, enclosed NEMA4X & IP65 type enclosure (with 1/2" FNPT conduit inlet) -40 to 185 F (-40 to 85 C), Max TRIP -79 to 302 F (-60 to 150 C), Hydraulic supply pressure 0.5 to 1.6 psi (3.4 to 10.3 kPa). Pneumatic supply pressure 5-7 psi, Max flow rate: Hygienic: LL-A: 20 lpm (5.1 GPM) LL-B: 50 l

This Three-way Valve Control with 3.8 CFM Capacity and Model Number VZMA6100 is a replacement of the original one that helps to turn the water on and off from the tab on the bottom of the valve. This part can be used for ZR39N series of water heaters, the VZCN110/120 water heater and others. This Honeywell product does not require any wiring to replace.

Switching between venting and cooling couldn't be simpler! Extremely easy to operate, the selector switch allows you to change positions easily. Simply pull up or push down on the knob for a wide range of comfort options:

The 3-way valve directs water flow to three different spray patterns: shower, jet, and mist. Three spray patterns for a variety of uses.

The VCM Act Electronic Control Module allows you to replace the complete control module on your system instead of simply replacing parts.

These valves are designed to operate from 2.4 to 6" (60 - 150 mm) actuating pressures, and are available in two models; versions with direct interface for the continuous attendance feature or versions without a direct interface but which simply require an interface solenoid to be added.