Honeywell VP527A1067 3/8inch Two-Way Unitary Valve (1.0 Cv)

"3/8""VLV 1.0CV 2-5PSI 1/2""FLARE"

This two-way, un-latching valve generally serves as a main shutoff for sprinkler systems. The 2-5psi operating range allows for fine-tuning of pressure levels and the 1/2"" flare to male 3/8"" NPT thread connection provides flexibility in system design. This valve requires 1.0 cfm @ 5 psi to fully open and .635 cfm @ 15 psi to fully close

The VP527A1067 1/2"" Domestic Pool Valve is a 2-way, 3/8"" 2-5psi valve.  It has a 15/16"" square bonnet and a body length of 1 7/8"". It has a bronze body with stainless steel disc/seat. The lever reach is 5/8"", and the vertical bonnet model is required for installation in some products. This lever actuated, air balanced valve has 1.0 CV rating and maximum operating pressure of 150 psi.  This family includes quarter turn straight stem models with an elbow stem

The VP527 is a two-way unidirectional valve and is used to control gas at the line terminal connection. This 3/8"" valve "(1.0 Cv)" has a 2"" threaded spool body and comes complete with a 1-1/2"" gas connection. This unit has a maximum working pressure of 5 PSI (0.35 MPa).

The Honeywell VP527A solenoid 1.0 Cv two-way, uni-directional valve is a solenoid valve designed for use in one-, two-, or three-piece air control kits, and is used to control a small pneumatically controlled pneumatic float or level device. The valve features the ASME coded flare fitting, 4-pin power supply connector, 22-gauge powder coated magnetic steel housing, and 316L stainless steel wear plate seals that can handle up to 2500 psi at 6 bar (87 psi at 1.1 bar).

The Honeywell VP527A1067 is a Unitary Valve, 3/8", 2-5PSI which is designed for use with many heating and cooling systems. The VP527A1067 will help regulate the amount of air that moves through your central heating and cooling system.

Honeywell Unitary Valves offer a wide variety of applications. These valves are pressure actuated, spool type, two-way actuators with spring return push type seats. They have threaded connections as well as 1/2" flare terminals for quick connections.

A two-way, 2-position unitary valve, this product has an operating water pressure of 1.0 Cv/1.0 Gpm at 50 PSI maximum and minimum operating water pressure of 3 psi. It has a solenoid coil voltage of 24 VAC and 30 VA/30 Watts power consumption maximum. Assembled in the USA, this product is made in Canada.