Milton Industries MIL640 Milton S- 1/4" ID Hose Mender Fitting - Pack of 2.

Hose Mender, 1/4" ID Hose

Keep your hoses under control with Milton Industries' 1/4" ID Hose Mender. This repair fitting is made from corrosion-resistant brass, which means it will last. It features a 9/16" x 29/32" male thread and a 1/4" female thread that makes it compatible with Milton hose products as well as 3/8" and 5/8" ID hose.

Achieve the strength of mechanical joining without the need for tools, Glues or adhesives. Milton Industries MIL640 1/4" ID Hose Mender restores flexibility to damaged hoses. The high performance adhesive works on most polyurethane and rubber hoses, or any other material with a rough finish.

Hose mender. 1/4" ID; 3/8" OD. The S series hose mender is a general-purpose utility fitting used to repair leaks in vacuum brake lines by replacing the damaged section with a new fitting and hose end. Hose ends can be slipped on in the field without tools or piping tape, thus eliminating lost time associated with these activities. Fittings are manufactured from stainless steel for maximum rust resistance in harsh environments. Maintains performance requirements of SAE J1417, ANSI B93, and DOT FMVSS 106

Our Milton Industries MIL640 Milton S-1/4" ID Hose Mender Fitting allows you to easily join hoses without the need for caulking, clamps, screws or other hardware. The mender fitting can be installed on most hoses over 1/8" thick, and it is solvent resistant.

Milton Industries MIL640 Milton S- 1/4" ID Hose Mender Fitting - Pack of 2.

Milton Industries MIL640 Milton S-1/4" ID Hose Mender Fitting - Pack of 2 is a multi-purpose fitting designed to repair and secure 1/4 inch (6.4mm) plastic or rubber hoses quickly and easily.

The MIL640 hose mender connects garden hoses or any type of 1/4" inner diameter tubing. The fitting is a polypropylene material that will fit into a 1/2" hole, and the black matte finish helps to minimize glare.