Hydrotherm BM-8785 350F M/R ROLLOUT SWITCH 350F M/R ROLLOUT SWITCH

350F M/R ROLLOUT SWITCH

The 350F M/R ROLLOUT SWITCH has an articulated roller arm mechanism with self-centering adjustment. It features eight-1 inch pitch rollers with positive-locking position control and stainless steel hardware. Contact closure can be momentary or maintained, and it is preset at the factory.

The Hydrotherm BM-8785 350F M/R ROLLOUT SWITCH is a 3 pole, wire wound triplex-magnetic switch. It can be used to switch current handling motors and/or other 230VAC loads up to 8.0kW. When operated from a remote location, the switches have a nominal voltage drop of 0.4V at 0.5Amp and a trip time of 1ms.

The 350F M/R Rollout switch is a General Purpose Air Pressure switch with an On/Off/On Rocker style actuator. The two momentary contacts are normally-closed and resist the "On" activating force of 10 oz. Compression terminals installed from below, through the enclosure wall. Application: Water Heater Rollout Switch

This 350F~800F (177~427C) roll-out switch is designed for continuous duty and can withstand high temperatures, making it ideal for use in areas where extreme heat may be present.

The Model BM-8785 Rollout Switch is a semi-flush mount, manually resettable switch for fire alarm systems. It mounts on a standard single 32mm DIN frame and has a rating of 350F/175C for ambient temperatures.

A high-performance, spring-washer type 350F/177C manual reset thermal switch for use with ovens, generators, or other devices that produce heat.

Safely shutdown heavy electric motors and equipment. Ideal for a wide variety of industrial motor control applications, large energy savings with motor protection operate at one-third the power consumption of other relays.

Our price for this item is based on the large quantity that you are ordering. You can mix or match different quantities of this item to reach the total that meets your needs. To get an idea how much you need, please feel free to call us

Open up your system to more water sources with the BM-3DR. This complete bypass module is designed to allow an additional water source while utilizing one existing feed line (at or between the distribution header/pump or distribution manifold).

Solar water systems can be a heat source for a hydronic heat system, a heat source for a gas or electric hot water heater or both. Nearly all remote heating applications utilize a fluid which moves from the solar panels to the storage tank, through the radiant floor tubing.