ICM Controls 66137 ICM450 3-Phase Monitor, 25-Fault Memory, LCD Setup and Diagnostics, Fault Identification

3-PHASE MOTOR PROTECTOR Programable

ICM Controls' 3-Phase Motor Protector can provide not only power interruption protection, but also trigger a variety of alarms to help monitor the status of your motor. It offers LCD setup and diagnostics, fault identification, and 25 fault memories. Typically used with single-phase motors, it can be easily programmed as a three-fault protector to protect large motors in industrial and utility applications. It features a high-speed event counter that tracks all circuit events, and the ability to set separate trigger

The ICM450 Series represents a new level of motor protection in the 240V 3-Phase NEMA Design. The ICM450 Series is suitable for all types of overload and short circuit protection for motors up to 3650 HP. This programmable protector features a 25 fault memory, allowing users to easily see each over current condition that has occurred on the system. The new LCD screen allows the user to view the fault history, time-of-day clock, setup menu and diagnostics functions in

The ICM450 3-Phase motor protector provides overload relaying protection, power limiting for all 3-phase motors, and fault recording. It is a highly versatile product intended for the protection of 3-phase AC induction, synchronous and universal electric motors from electrical faults. The ICM450 uses a variety of different input signals to capture an extensive view of motor operation including Open Locks and Shorted Stator Faults.

The ICM450 is a microprocessor-based Motor Protector unit designed to protect electric motors against damage by overloads, short circuits, and open circuits. The device provides shutdown on three phases, allowing for complete protective tripping of the motor. It automatically resets when the abnormal conditions have been removed. The ICM450 is easy to install and easy to commission. Features include: 0.8" visual Fault Readout; Led Fault Display; Three Phase Input; PWM Trip Technology; Automatic

The ICM450 Series of industrial programmable for 3-phase motors provides all the features necessary to control a 3-phase motor in either induction or synchronous mode. The ICM450 Series offers 25 faulted history, including complete drive details of motor faults, allowing the user to respond quickly to drive faults and related maintenance issues.

The ICM 450 is designed to protect three phase power from damaging surges and shorts. The 75 amp continuous duty version will protect up to 250 HP motor loads or up to a 60 HP motor with a short circuit and a 130 HP motor operating at full load. A programmable timing feature allows the user to control the on time delay, off time delay, and retry on shutdown.

With ICM Controls' Quattro monitor, you can view motor and generator performance in a single log, for 3-phase motors only. By monitoring 3-phase voltage, frequency and current from the ICM450 3-Phase Monitor, you'll be able to prolong motor life and reduce energy costs. It monitors for under/over voltage, under/over frequency, over load conditions, phase imbalance, faults, ground fault protection (GFCI) and phase loss alarms, with scan capabilities