IDEC Relays RH1B-ULAC24V 24V SPDT Blade Relay W/Indictr

24V SPDT Blade Relay W/Indictr

This IDEC RH1B-ULAC24V 24V SPDT Blade Relay W/Indictr can be used where a switching device such as a timer or speed controller is needed to operate a relay or contact actuator. It is compatible with an AC voltage range of 18-28VDC, 1 or 2 wire operation, and up to 6 amps per coil.

The IDEC Relays RH1B-ULAC24V is a 24V SPDT relay with indictor, designed for OEM applications. The relay converts the input voltage into 24V at 2.4A continuous and 10A peak. Applications:industrial control,automotive switch,consumer electronics

The IDEC RH1B Series is a 24VDC SPDT Relay with built in indictor to detect a positive or negative going input signal.

The IDEC Relays RH1B-ULAC24V is a SPDT Relay with INDICATOR that provides solid 1-1/2 inch or 2 inch blade terminals and accepts up to 5 amps.

With the IDEC RH1B-UL AC24V blade relay, standard relays become a thing of the past. It monitors both phases of a 2-wire AC circuit and feeds this information to an up to 8-bit 1MHz microcontroller. When a change occurs in that monitored current or voltage, i.e. phase loss, the controller outputs a single-shot pulse to its output terminal 250kO current limiting resistor required). Control power requires 24VDC. Monitoring input

The RH1B-ULAC24V 24V SPDT Relays are positive actuated and have a plastic blade on/off actuator (pneumatic SSR# 1757). They have a single 10A SPDT contacts, UL1053 CSA engraved. These relays are identical to the RH1C series with the exception of a no LED indicator.

IDEC Relays' RH1B, isolate 24V DC devices up to 100W with ease. These SPDT relays have a high-power lug on one side which will accept a common relay coil wire. With an integrated indicator, this relay can be used in applications including: LED indicators, alarms and other indicating devices, electrical equipment, power control (stack lamps), and remote control systems.