Nemco
DICER-1/4 NEM for Nemco - Part# 55500-1
This is a 1/4" NEMCO Dicer for Nemco.
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New AccountINFINITE HEAT SWITCH for Nemco - Part# 47217
The INFINITE HEAT SWITCH for Nemco Part# 47217 comes with an electronic ignition that is safe for use in any kitchen. This switch also has a flame failure override switch that will not allow the motor to run if the flame is not present.
The INFINITE HEAT SWITCH 47217 allows fast, automatic preheating of Nemco grills and fryers without using a Thermostat. It is an economical switch that will work with any flat range style cooking surface. When used in conjunction with the dial timer 49131, infinite heat control automatically maintains cooking temperature within 5° F of set point.
This Infinite Heat Switch for Nemco Model 47217 grills is the replacement switch for several different models. It is designed to turn the heating element on or off when the standard thermostat control cannot be used or does not provide a suitable function.
The INFINITE HEAT SWITCH for Nemco is used on ALL Nemco models of hot dog, hamburger, or snack food warmers, and is easily identified by the adjustable temperature dial.
The infinite heat control device for the Nemco 47217-04 grill assembly is an auto-reset switch that provides automatic burner safety and operation. The heat control device monitors the pilot lights and adjusts flame intensity during temperature surges while eliminating temperature fluctuations that occur when grills are left unattended.
The INFINITE HEAT SWITCH is a single pole, single throw, non-contact pilot switch designed for use in HACCP applications. Push button is depressed to turn on heat and does not return automatically. Four Element pilots can be wired in parallel to increase wattage up to 960 watts. Momentary switch includes Nickel Plated Brass Connectors and comes standard with a #10-24 screw for mounting on the heat coil
We have designed a new "INFINITE HEAT SWITCH" that will replace the smaller single (or double) contacts on your old model heaters. This new switch provides for more precise temperature control and will increase the heating capacity of your existing heater up to 33%.