Mo-Clamp MOC6317 6317 "J" Hook with Chain

J-HOOK WITH CHAIN 3/8IN

Mo-Clamp MOC6317 6317 "J" Hook with Chain 3/8IN Motor (Almond) 1/9 H.P. 760J-HOOK WITH CHAIN 3/8IN

The Mo-Clamp MOC6317 6317 "J" Hook with Chain 3/8" x 5' Motor (Almond) 1/9 H.P. 760J-Hook with Chain - Suitable for 33lb to 155lb vertical hooks

Mo-Clamp MOC6317 6317 "J" Hook with Chain 3/8IN

The Mo-Clamp 6317 Motor "J" Hook with Chain is a quick and easy way to support 11/4 in. I.D. round or square tubing above or below motor "J" hangers or wire hooks. Simply attach the rod end of the J-hook over the motor hanger, then clamp the flat strap and adjustable chain onto the J-hook. For added strength, remove one of the steel washers inside the J-hook and replace it with an anchoring bolt and nut to bolt the "J" hook to flat bar or beam. The flat strap of this machine is constructed of aluminum with a zinc plated clevis pin and D-ring for extra strength. And for additional safety, it features prongs made from heat treated alloy steel that are insulated with high temperature plastic sleeves to protect motor wiring.

The "J" Hook with Chain is used to raise, support and stabilize conveyors from the floor or from a track. The chain has an inside diameter of 3/8" and is rated at 6000 lbs. It is 45' long with two metal hooks at the end.

Mo-Clamp 6317 Twist chain - Chain is permanently attached to chain hooks (motor j-hooks) eliminates disconnecting from the motor and saves time and labor in servicing. Chain meets the requirements of ASME B30.26 Standard for Class 1, Class 2 and Class 3, Grade A Industrial J-hooks with Chain.

This Mo-Clamp is made of steel and has a zinc plated finish with an almond motor color. It has a 6,300 lb. capacity.

The Mo-Clamp "J" Hook, chain and included hardware allow for easy mounting to tubing or round poles. Includes yoke, 2 screws and chain. The "J" fits 3/8in OD tubing. It is made of aluminum alloy, paintable and made in the USA.

The Mo-Clamp Motor Mounting Clamp has a vinyl coated finish and will get your project up and off the ground in no time at all. Attach any power tool, lawn equipment, or other garden machinery to sturdy beams, or to trees with the chain extension. The flexible metal cable swivels around corners and makes it easy to attach to irregular surfaces.

Our new J hook is ideal for your light weight loads. This unique design can be used horizontally or vertically and is fabricated from stainless steel to ensure a lifetime of reliable service. M.O.C. Products J Hooks are made in the USA and come with a one year manufacturer warranty against defects in materials and workmanship. Matching chains are available and sold separately

Mo-Clamp's Chain Hooks (1/2" diameter) are extremely useful in a variety of applications from moving machine parts to lifting pipe or other heavy weight. They offer the ability to join two lengths of chain creating a custom length as needed. The round shank (1/2", 10mm) can be inserted into the hollow eye of a beam or machine support. The forged support bracket is designed to allow the hook and chain to slide back and forth allowing maximum flexibility with minimal effort.