JOHN PUMP MACERATOR 12V
The John Pump TA3P10-1907 12v macerator pump is suitable for light commercial applications. It has been designed to provide maximum efficiency in an industrial environment.
JOHNSON PUMP 6003099 12 VOLT MACERATOR PUMP TA3P10-1907
JOHNSON PUMP 6003099 Macerator Pump, TA3P10-1907, 12V - 900 GPH (1950 L/H), - Shallow Well Jet Pump Housing, - Polypropylene Head / Impeller, - NPT Threaded Inlet & Outlet with Brass Inserts, - O-Ring Sealed/Bearings
JOHNSON PUMP 6003099 Macerator, TA3P10-1907
This Johnson Pump TA3P10-1907 is a macerator pump that has an inlet size of 1-1/4" and an outlet size of 3". The flow rate of the pump is 800 GPM at max head. The motor HP is 2.8 HP at 130 VAC and 60 Hz. The pump frame is cast iron with a Noryl body. The pump is stainless steel shaft and available in NPT and NPTF discharge options. The max pressure is 400 psi at 25 feet of head, while the max flow velocity is 1600 FPM.
Pumps waste from your grey water tank to your toilet or disposal. Waste flows by gravity right into the toilet bowl. Powerful latex ejector, compact design, 110 lbs suction lift, and quick-release connections make this low flow toilet pump easy to install and operate. This macerator is designed for use with 12 volt systems only.
The JohnsMan TA3P10-1907 is a submersible macerator pump that pumps sewage directly into a sewer pipe and eliminates the need for a 3-inch diameter hole in a concrete slab. The pump is designed to be used in residential applications that require a back-up water source, such as homes located in flood zones, or homes with well water.