Johnson Controls 3449 F261MAH-V01C "FlowSwitch 1"" Nema 4"

SPDT FLOW SWITCH W/NEMA 3R ENCLOSURE REPLACES F61M

F261MAH-V01C FLOW SWITCH W/NEMA 3R ENCLOSURE REPLACES F61M FlowSwitch 1". Nema 4" enclosure: 10A, 120-277V, 50/60 Hz . The FlowSwitch F261 configuration complies with ASHRAE 40 standard and is safe for use in commercial and residential applications. This F261 configuration can be used in HVAC, water heaters, hydronic boiler applications, humidifiers

Designed to replace a F61M flow switch, this 4-in Nema enclosure is ideal for use in many procedures. The Nema 3R Enclosure revises US and international standards with its IP66 protection against water damage. This flow switch features a unique one hand manual test and wire clip included regulator. Its direct wire-to-wiring connection offers a reliable source of energy with an output control range of 0% to 10%.

When no power is present, the flow switch is open. When it gets wet, the flow switch trips and sends a signal to turn off power. The F261MAH-V01C fits in NEMA 3R enclosure with 1.0 in ports and has a coupling nut that matches the square flange on your pump of filter, for example: F71M, F44M, or an EPA filter with a 1

The next innovation of the FlowSwitch family with the convenience of a NEMA 3R enclosure, perfect for a cold water application. The F261MAH-V01C is a

The F261MAH-V01C Flow Switch was designed and built to withstand extreme industrial conditions. This flow switch offers a multitude of features including: High Mechanical Shock Resistance, Independent Magnetic Contacts With Snap Action Or Hold Function, Removable Metal Cover To Access The Magnetic Contacts, Standard NEMA 3R Housing, Sealing Gasket For Switch And Cover, Adjustable Contacts For Cleaning Purposes, Threaded Terminals For The Connection To The Power Supply And Signal Line

The FlowSwitch, F261-MH has universal switching capability and can be configured for Main/Bypass or Normally Open applications. Typical mounting in an enclosure consists of one welded SS316 fitting for gas input tubing connection and one welded SS316 fitting for gas output tubing connection.

The FlowSwitch F261MAH-V01C is a pressure switched device containing a solid state electronic flow controller and is compatible with low, medium, and high pressure pipe. It is designed to protect or control process and liquid systems when the pressure in the system reaches the set point of 12.0 psi . The F261MAH-V01Cis UL Recognized and CSA Certified to ANSI/ISA S82.02 standards with Type 4X construction for dust and water resistance