Johnson Controls 541092 SOLENOID VALVE;1/2 120V

SOLENOID VALVE;1/2 120V

Our 1/2 hp Solenoid Valves are designed to provide positive shut off for water, gas, and steam applications. The modular base is compatible with different solenoid coil configurations, mounting options, electrical connections & end fittings. Stem options are available for two-way or three-way flow control.

Solenoid Valve (above right) is made of brass and zinc and has a brass header and spring tension assembly with a voltage rating of 115V AC with a current rating of 1.7A at 60HZ

Have multiple destinations and changing plans? The Johnson Controls 541092 Solenoid Valve has the parts and pieces to keep you moving forward. It has a 1/2 inch female thread and an 1/2 inch male thread so it can be connected to a wide range of products. It also offers long lasting durability so it can be used for years to come, and its lightweight design makes it easy to carry wherever you may go.

This Solenoid Valve is in NEW Condition. The item is tested in 100% working condition. No instruction manual with the product. Buyer assumes responsibility for use of this item, due to limited product information.

Johnson Controls® Solenoid Valve® System, SVS®7 Series, 120-Volt AC Supply, 1/2 in Tubing Size.

Solenoid Valves are designed to start open, remain open until a drive power is applied, and then automatically close. Applications include direct pneumatic control of valves, solenoid air flow control in heating/cooling systems, water treatment plants, cooling towers, humidification plants, sanitation plants, process plants, chemical plants , AGT driven valve controlling small motors in fountain overflow applications.

Change the water or air temperature in your home with just a flick of a switch using the Johnson Controls 541092 Solenoid Valve, which is easy to wire and use, and is energy-efficient. This valve is designed to regulate the heating and cooling system pump to control hot water for instantaneous household use. It has an electrical range of 120V and 0.25 amps. Includes mounting bracket, screws, and wiring diagram.

Stop leak valve will shut of the water supply to the toilet, shower, sink or tub if a leak occurs. The solenoid valve will completely fill flushometer tank with water every 8 seconds. Valve is wired for 120 volt supply and 15 amp circuit breaker or fuse.

Amp up your compressor, commercial refrigerator and freezer cooling systems with a Solenoid Automatic Overload Relay from Johnson Controls. This valve is a genuine OEM replacement that fits a wide range of compressors including Yale, Kelly, Nashua and others. The heavy-duty solenoid relay is rated for 120 volts and 1/2 HP at 29 amps.

The KGF100 is a hardwire solenoid from Johnson Controls. This solenoid valve can be used on a wide variety of applications and is particularly useful in low voltage heating and air conditioning systems. It comes with a mounting bracket and a No 12 connection wire. For supplemental product information, please visit http://www.jcu.com/sales--service-parts/product-catalog/pdf/541092_KGF100-02.pdf

A door can be opened and closed with no effort on your part.

With reliable safety, energy-saving technology and thousands of other innovative products, you can find the right solutions for today's building needs. Johnson Controls is committed to environmental responsibility—our focus on maintaining the quality, value and safety of our products is matched only by our dedication to protecting human health and the environment.