SPRING KIT,4-8 PSI, USE WITH V3000 W/ 5/16TH STROK
JOHNSON CONTROLS 6001 SPRING KIT,4-8 PSI, USE WITH V3000 W/ 5/16TH STROK
Keep your V3000 compressor in top shape with this replacement 4-8 psi spring kit. It produces anywhere from 4-8 psi, has a wire size of 0.206in., and fits in the V3000, V3000LA, V3100, V3110, V3700, V3700LA and others. This Johnson Controls spring kit offers quick replacement for when your current one wears out.
Frequently changing pressure in your spa is critical to maintaining comfort. This replacement spring kit will give you the best performance for your V3000 Series spa.
Product Description: After five years of successful operation, Johnson Controls offers replacement springs for the V3000, V6000 and V8000 alarms. This spring kit helps extend the life of your current alarm. These springs will be compatible with your existing system and will allow you to adjust pressures lower and higher than the original factory settings. We recommend that you check your gas pressures frequently, especially if you live in a metropolitan area or change homes. It is not uncommon to forget how much the system has been adjusted over time.
The Johnson Controls DT300 is a direct-to-disconnect control with a 4-8 PSI high range spring kit. Bombardier is the only manufacturer to have a factory approved aftermarket manual pump system.
A compressed air delivery spring designed to replace the original spring on the V3000 View-A-Box and other similar products. Housing and spacers (where appropriate) are lightweight and corrosion resistant.
Use with 5/16th Strokes for proper vacuum adjustment. For use on Johnson Controls Skyscraper Pro, Johnson Controls Kleenplus, Johnson Controls Specialty Series (SKB/SKC) series Vacuums.
This kit contains 5 total springs, 4 engine coils; 2 engine valves, and installation instructions.
For use with Johnson Controls 3000/3100/3200 Large Vertical Pumps, V4000 & V5000 Vertical Pumps.
Temporarily out of stock