JOHNSON CONTROLS A-4000-1049 Pneumatic Oil Filter, 3/8 In. NPT, 30 cfm

3/8" NPT. PNEUMATIC OIL FILTER-23 SCFM REPLACES A-

The manufacturing process for this Johnson Controls A-4000-1049 Pneumatic Oil Filter, 3/8" NPT, 30 cfm meets the highest standards of quality, durability and dependability. Designed with attention to detail and built to withstand years of high performance usage. The application of high-quality materials ensures long-lasting use at an affordable price.

The Pneumatic Oil Filter has a capacity of 23 SCFM @ 90 PSI. Flow Restriction is 0.3 Micron and a Burst Pressure of 540 PSI. The Flow Rate vs. Back Pressure for this Oil Filter provides a Capacity Factor of 90%. The Replacement Media Cartridge is 0.3 Micron. This unit meets Current Air Pollution Control Requirements, Constructed from Virgin Bristle Glass Beads, Quantity of Micro Media Filters should be selected based on the required capacity not to exceed the rated flow rate, The Replacement Air Pollution Control Media used should contain 100% virgin bristle glass

The A-4000 Pneumatic Oil Filters, Model No. A-4000-1049 for JCI engine air compressors Model No. AC-060, AC050, AC060E, AC100, AC1010, AC1021CII, AC1023 II, AC1000 II. These filters are also suitable for use with other compressors using 3/8” NPT pneumatic inlet fittings.

The A4000 Pneumatic Oil Filter is designed to replace 1-1/2" panel filters, such as the A-4400, and the A (2A) and B (3A)-Series filters by Honeywell. The A4000 Pneumatic Oil Filter is a four-stage filter that utilizes a miniature pneumatic pump and elastomeric element to provide positive pressure for oil filtration and return to the compressor.

Our Pneumatic Filter is a perfect replacement for the Johnson Controls A-4000-1049 oil filter. The rubber hood fits snugly over the filter body for easy installation and removal. The pneumatic oil filter requires a pressure of 10 to 70 psi to operate correctly.

The A-4000-1049 is a pneumatic oil filter that is used in applications such as turbocharging and seco

The A-4000 series of positive displacement scroll compressor oil filters are designed to prevent the back flow of unfiltered compressor oil into the airstream or piping system. This series is available in 2 models with flow rates up to 50 SCFM; this model is available in various mesh sizes (0.005"~0.125") and 3 different housing sizes (1.25", 1.5, and 2").

The A-4000 Filter from Johnson Controls is built from a rugged steel housing. This filter comes with rubber gaskets for a tight seal and features a pressure relief valve that automatically opens at 175 psi to allow excess oil to escape. It also comes with a manual bleed valve that ensures quick and easy replacement of filters.

Model A-4000 combines high volume, low pressure air filtration with a rugged design to ensure long life and quiet operation. A vacuum relief valve within the filter housing relieves damaging compressor surges and improves overall system efficiency. All models feature three-stage filtration: coarse, fine and Hepa. The disposable filter element resists clogging and extends service life.

The A-4000 series is designed to meet the performance requirements of facilities service contracts for dust removal, air filter service, balance-of-plant facilities service contracts and for applications requiring an inexpensive disposable filter. With efficient design features, efficient fluid handling capacity, dependable performance, rugged construction and low cost of ownership, the A-4000 series provides facilities service contractors with a variety of solutions to meet their specific needs.

Pneumatics are required to deliver compressed air or gas where electrical power is not practical or readily available. Welding, mining, construction, dairy and agricultural operations all depend on pneumatics. But first...the compressor.