Johnson Controls A19AAB-4 SPST REMOTE BULB TEMP. CONTROL 12 CAP. NEMA 1 100/240F 4 DIFF.

"30/110F

This FS1T-7 (30/110F T1) Single Pole, Three Throw (SP3T) on-off switch rated at 12 Amps and 250 Volts AC, is constructed with an amber thermoplastic polyester diffuser and a white thermoplastic polyester lens. This device works by opening and closing the electrical circuit to the attached fluorescent lamp as the ambient temperature changes. It can be used outdoors to control daylight or indoor to control air conditioned areas.

- Johnson Controls Part Number A19AAB-4 SPST REMOTE BULB TEMP. CONTROL 12 CAP. NEMA 1 100/240F 4 DIFF.

For use with A19, A21, CA10R/CA10RC, CA10WC/CA10RC, CA14RC, CA14RCY, C7 (2 poles) and C9 (3 poles).

This hard-to-find control is also available here only from us. It is the SPST remote bulb temperature control 12 cap that we use in our own product line and we know you'll love it. It supplies 110 volts and has a rating of 2 amps and a maximum of 24 watts for this specific type of base."

The Johnson Controls A19AAB-4 Remote Switch Temperature Control is a 4-Position and features NEMA 1

You can now control the temperature of your lights to match your need with Johnson Controls A19AAB-4 SPST Remote Bulb Temp. Control 12 Cap. NEMA 1 100/240F 4 Diff.. Unlike any other type of light switch, this remote light switch is compatible for both fluorescent and incandescent bulbs. Install it without having to drill holes, making it easier to install. The product comes with a complete set that consists of the housing, the wiring harness, the rocker switch and two screws. It also has 12 switches that are controlled using the rocker switch. The installation requires no special skills

An economically priced, hard wire thermal flasher for all suspended emergency and hazard lights.

Remote, self-contained switch module for 4-wire applications that operates either one or two SPST (ON/OFF) devices.

This is a simple and convenient way to keep your bedroom or living room just the way you like it. This fully programmable A19 Remote Bulb Thermostat is designed for use with most standard incandescent light bulbs (up to 100 watts, 12V AC/DC). A miniature LCD screen displays both the current room temperature and the selected set point. A built-in light sensor makes this thermostat especially easy to use; simply set your desired settings and the remote will automatically control the lights based on the ambient conditions in your rooms.

When replacing an existing light fixture with a new ENERGY STAR model, this remote temperature switch can be installed to give you manual control of the light temperature. It also allows you to save energy by pre-heating or cooling the area before occupancy. Plus, it's easy to install.