Johnson Controls A19ABC-4 50/130F SPDT 8'CAP ADJ.DIF.

50/130F SPDT 8'CAP ADJ.DIF.

The A19ABC-4 50/130F SPDT 8'CAP ADJ.DIF. Appliance Lamp Control is a Single Pole Triple Throw 8 Amp Double-Pole 130 Volt Selector Switch.

A19ABC-4 50/130F SPDT 8'CAP ADJ.DIF.

Johnson Controls A19ABC-4 50/130F SPDT 8'CAP ADJ.DIF. (90640583873)

The Johnson Controls A19ABC-4 50/130F SPDT 8'CAP ADJ.DIF. provides a cost effective solution to improve energy savings in commercial applications including lighting, HVAC and specialty systems. This Dimmable is designed to offer the thermal performance of a standard incandescent, but with the energy savings of a compact fluorescent bulb when used according to specified guidelines for CFLs.

The 50/130F SPDT 8'CAP ADJ.DIF C-size thermocouple kit from Johnson Controls provides a wide selection of applications for various industrial processes. The kit includes a 250C rating thermocouple that measures temperatures from -50 to 500 degrees Fahrenheit, while the 600C rating model measures temperatures from -45 to 650 degrees Fahrenheit. This kit is among the many products offered by Johnson Controls to meet a range of industrial needs.

The Johnson Controls A19abc-4 50/130F SPDT 8'CAP ADJ.DIF busway switch is designed for the electrical service industry. It is constructed with brass terminals, carbon drop-out contacts and copper alloy blade terminals on the busway side. This busway switch can handle voltages up to 600 volts and currents up to 50 amperes at 130 degrees Fahrenheit.

When a residential load center must accommodate a large number of services, a neutral bus is used to distribute circuit power via the use of a breaker system. This unique configuration relies on an automatic transfer switch to select one or another power sources. The ATS 50/13 SPDT 8'CAP ADJ.DIF. incorporates automatic as well as manually operated switching as required by NEC® for this application(s).

Built-in features for this customizable thermostat kit include 50/130F SPDT, 8'CAP Adjustable differential, Adapter kit. For maximum comfort, the kit comes with a removable adapter that allows floor stack mounting. This Energy Star qualified kit also includes an Energy Triangle that indicates whether the system is heating or cooling. The Energy Triangle enables verification of proper installation before being powered up.

ADJACENT DIFFERENTIAL PROTECTION--For circuit protection of industrial, commercial and residential branch circuits such as electric motors, transformers and lighting fixtures. Automatically disconnects line voltage to downstream devices when there is a short to ground, protecting the upstream equipment from undetected shorts to ground. Remains latched during subsequent power failures to provide additional protection against subsequent shorts to ground until reset manually. Adjustable differential time periods are 1 millisecond through 8 seconds. 8-second setting requires approximately 34 milliampere of differential current at 120/208YVY-120/240 volt power systems.

The A19ABC-4 is a Miniature Circuit Breaker, adjustable from 50 to 130 amps for applications requiring higher amperage capacity. It has a operating temperature range of -40ºC to +50ºC and its trip release is adjustable from 40 to 80 amps. The A19ABC-1 thru 4 Series circuit breakers are specifically designed for use with dedicated Consumer Unit of the DHW Photovoltaic Systems.

The A19ABC-4 ceiling fan control features a standard screw terminal installation to simplify the wiring process. This unit is used with single phase, 60 Hz systems and has a rated voltage of 120VAC.

Make sure you're using the right amount of power with this switch. It's easy to install since it's light and small. Each of these has circuitry tested prior to shipping. It also comes with a limited lifetime warranty, so you won't need to worry about readjusting it.