Johnson Controls A19AHC-8 , Inc. A19AHC8 30/180f SPDT 8' Cap TempCntrl

30/180f SPDT 8' Cap TempCntrl

This Johnson Controls, Inc. A19AHC-8 , Inc. A19AHC8 30/180f SPDT 8' Cap TempCntrl is a compact aero-coupled ceiling mount control that controls heating and cooling units with one or two stages that are rated from 1/2 to 5 Hp. The heavy duty elevator hoist type actuator, proportional temperature controller causes 50% of final field current to be commanded when the local room temperature reaches +/- 18 deg F (+/- 10 deg C) of the set point, approaching the set point at between 5% and 25% of final

The A19AHC8 30/180F SPDT 8' Cap Two Stage Temperature Control with a -15 to 450F (-26.1 to 233C) is Made in the USA and is designed to control the temperature in enclosures containing water for swimming pools, spas, hot tubs, industrial process equipment, hydronic heating systems, agricultural and food processing applications.

The Johnson Controls A19AHC-8 (A19AHC8) is a 30/180f SPDT Cap Push Button Controller for TEMPERATURE with a 8' cord and an 8' lead wire. This Controller is used to control single stage heating and cooling systems. This device is NOT suitable for use as a switch in UL applications.

The Johnson Controls A19AHC-8 , Inc. A19AHC8 SPDT 8' Cap TempCntrl is a suitable replacement for select electronic ballasts, specifically designed for use in conventional fluorescent fixtures and having a maximum input voltage of 590VAC at full load and a full wave peak power factor of 0.95.

The 8' Capilliary-Style Temperature Controller is an electric device used to sense and control temperature in a heating or cooling system. A coil of capillary tubing (which is enclosed in a paper sleeve inside the controller box) is inserted into the room air and sealed at one end. The other end of the capillary is positioned close to the heat source or heat load. This creates a thermal gradient down the length of the capillary, which causes a temperature difference between the air at each end of the tube. To compensate for changes in room air temperature, a variety of different types of dampers may be controlled by

Control a complete range of Johnson Controls A19 Medium Screw-Cap incandescent bulbs with this 8' Surface Mounted Dimmer. Simply wire the device into your existing light switch circuit for reliable operation. With a compact design and durable plastic casing, this dimmer is both stylish and functional.

These Control Units come with a Capillary Sensor, and a built-in Overload Protection (OLP). The OLP is an essential safety component when used on 30 Amp branch circuits. This device will sense current overload (amperage) and thus avoid overheating the wire and breaking the circuit if there is a fault.