Johnson Controls A19BBC-2 Line Voltage Mechanical Thermostat, Heating/Cooling, 120 to 277VAC, 1 Stage

-30/100F SPDT TSTAT W/ADJ DIF

-30/100F SPDT TSTAT W/ADJ DIF Natural Iron, Big Blue Ribbon Backplate. - Prod Code: JCM600-600

-30 to 100F, stage 1/2 (one stage heating and one stage cooling) mechanical thermostat. Push button controls.

The A19BBC-2 line voltage mechanical thermostat controls single stage heating/cooling systems. It has a max differential of 15 degrees F with a C range of 30 to 100 degrees F (switch must be in the "CCW" position). The housing is made of flame retardant plastic. It is suitable for use in RESIDENTIAL, INDUSTRIAL and COMMERCIAL areas. The thermostat has an operating temperature range of 50 to 122 degrees F (25 to 50 degrees C), and an ambient operating humidity range of 10 to 90%.

-100F to +300F, R-, 2-Stage, 1/2 In Valve

Anyone looking for a new thermostat can easily trust the Johnson Controls A19BC-2 Line Voltage Mechanical Thermostat. This handy thermostat offers a 1 stage design, and is 120VAC and 277VAC compatible. It also comes with a built-in differential and an adjustable dial on the device.

If you are looking for a thermostat whose capabilities will not be hindered by extreme temperatures, look no further than the mechanical Johnson Controls A19BBC-2. Designed to operate in lower-ambient conditions, this model not only provides precise, stable control but also comes with an adjustable differential to enable accurate control of radiant, boiler, and space heating loads.

Our mechanical thermostat provides maximum energy savings by allowing you to pre-set your desired temperature for any room. This thermostat has a built-in differential of 20F between the on and off temperature settings, so your system only operates when needed. It includes a built-in buzzer, so you can have your thermostat notify you up to 100ft away with adjustable on/off time settings.

The Johnson Controls A19BBC-2 Line Voltage mechanical thermostat, one stage is for heat pumps, gas boilers and heat only heat pump applications. It is designed with a reflector or by-pass draft actuator, low temperature heating protection, continuous thermal overload protection and a combination input/output terminal block. The A19BBC-2 can be used as a temperature control device only or as a temperature control device with a separate humidistat.

An electrician-friendly mechanical line-voltage thermostat like no other. The Johnson Controls A19BBC-2 is designed with an adjustable lead, or "L" range feature, that is very easy to use and extremely reliable. The Johnson Controls A19BBC-2 is suitable for most single and multi-stage heating and cooling systems and provides outstanding protection against dangerous overshoot and undershoot resulting in reduced motor loads and longer system life.

Johnson Controls A19-2 line voltage automatic temperature controls with separate cooling and heating stages. A19 Series timers are used to control air conditioning, heat pumps, electric blankets, humidifiers, de-humidifiers, exhaust fans, fountains, space heaters, water heaters, ventilators, air compressors/pumps & miscellaneous home comfort equipment.

A self-contained, complete temperature control device with a single stage of operation. Meets federal energy conservation standards for energy efficiency. This one stage thermostat is intended for use in a heating or cooling mode in a mechanical system within a commercial/industrial building where the media used is air and the sensing element is a bimetallic coil. It contains a built-in heat anticipator to prevent overtemperature conditions in the event of a fault in the system

An advanced thermoelectric heat pump is a highly efficient, two-stage heating and cooling system that provides energy savings and comfort. The high-efficiency condenser works outdoors to extract heat from the air and water in the surrounding environment. The A19CBC-2 controls the indoor unit , which then uses that captured heat to provide comfortable heating and cooling in your home or office.