Johnson Controls A19DAC-1 100/240F STRAP-ON SPDT 10'DIFF

100/240F STRAP-ON SPDT 10'DIFF

This Johnson Controls A19DAC-1 100/240F STRAP-ON SPDT 10'DIFF, is a "Strap On"for Diffused - Fused - Receptacle. Utilize for Porcelain Socket and Wire Guard Applications. UL listed. Amperage: 20

You can use the Johnson Controls A19DAC-1 100/240F STRAP-ON SPDT 10'DIFF on all Johnson Controls Series A and CSX Emergency Ballasts. It is designed for use as a substitute for ballast fuses that are subject to failure at high altitudes in settings outside of the 0 to 2000F temperature range. The Johnson Controls A19DAC-1 100/240F STRAP-ON SPDT 10'DIFF is suitable for operation at normal installation site ambient temperatures, constant voltage system applications, and use with Class 2 or Class 3 Relamping Kits.

The Johnson Controls 100/240F Strap-On SPDT 10'Diff Contactors, are designed for 120, 208 or 240/277VAC circuits. The series comprises a standard type D, 100/240 volt strap-on fitting contactor with 10 amps of current handling capacity and an inrush current of 30 amps. Field operation is normally done by means of a change lever, but the contacts may be operated directly by close-approach withdrawal of the handle rod from holder. Contact is made during fault conditions by release of a manually-operated low-current holding device, which permits influence-lighting of the

The STRAP-ON SPDT is used to control the heating and cooling of liquid in heat transfer or refrigeration processes. It covers a wide temperature range, working at 100 to 240F. Its small size means it will fit into tight spaces, and it is for use with R12 and R134a refrigeration units.

With the A19DAC-1 fully adjustable strap-on SPDT relay, Power Conversion Group offers an Allied Signal replacement for automotive applications. Johnson Controls Power Solutions introduced the A19DAC-1 product family in 2009 to redesign and improve the performance of the existing 9900 product line. The device is suitable for all low voltage 100/240 AC voltages made by every automaker, electronics suppliers, and tier one (original equipment) suppliers.  The wire terminal strip terminals are rated at 8A (resistive), 2A (inductive), and 1A (capacitive).

The A19DAC100DAC180-2 is a 100/240V AC, RF SHUNT, STRAIGHT & DIFF TEMPLE UNIT WITH MOUNTING BRACKET. The unit is suitable for use with the Johnson Controls line of Central Air Conditioning (CAC) and Furnace applications, as well as several other built-to-order applications in the Comfortech and Principia Automation Series. These units are commonly installed on control panels or box assemblies containing other Control Council (CC) products.

Battery backup DIN rail power supply; 10-ft 240V input-100-240 VAC input or 120/208 VAC output; 100-W maximum continuous output power; -40 to 60C operating temp range; UL 508, file no. E853894, cULus