Johnson Controls A421ABG-02 120vPwrCrd SPDT -40/212F 6'SEN

120vPwrCrd SPDT -40/212F 6'SEN

The Johnson Controls A421ABG-02 120vPwrCrd SPDT -40/212F 6'SEN is a 6 foot Solenoid Operated Double Throw Power Contactor rated for 120 VAC at 12 amps (240 VAC per coil) and 204 Vac at 8.3 amps (208-240 VAC per coil) when used with a 24 VDC power supply. The contacts are rated for 600VAC, 48VDC and 24VDC continuous duty. The A421ABG-02 is also supplied with two 14 gauge 5 foot leads with 250V test ring terminals.

120VPWRCRD SPDT -40/212F 6'SEN

The Johnson Controls A421ABG-02 120vPwrCrd SPDT -40/212F 6'SEN is a 120VAC, 3 wire power cord that has a PTC thermistor built into the plug. The thermistor limits the amount of current flowing through the cord when excess heat is detected. The thermistor will disengage in the event the temperature around it gets too high.

This is a 120 VAC, 50/60 Hz, single pole double throw switch rated 10A at 120VAC; 1A at 24VDC. The SPDT contacts are rated at 10 amps resistive and 15 amps inductive. The device has a current rating of 1.5 Amps in the off position to 0.5 Amps in the on position. The response time is 400mS and the mechanical life of the switch is 5 million cycles with a minimum of 500,000 cycles at full load. The unit is sealed in an aluminum alloy case that meets IP68 standards.

Johnson Controls A421ABG-02 120vPwrCrd SPDT -40/212F 6'SEN

The Johnson Controls A421ABG-02 120vPwrCrd SPDT -40/212F 6'SEN features an inductive, non-contacting sensing coil and a spdt power relay. The A421ABG-02 120vPwrCrd SPDT -40/212F 6'SEN is designed for use in commercial and residential applications that require a simple, contact free switch.

The A421ABG-02 120vPwrCrd SPDT is a 120VAC 6A power cord with a straight (SPDT) switching action. It has a female plug at the end of the power cord and comes in 6' length.