Johnson Controls A99BC-300 HiTmp Snsr 9.75ft -40-248f HiTmp Snsr 9.75ft -40-248

HiTmp Snsr 9.75ft -40-248f

The Johnson Controls A99BC-300 HiTmp Snsr 9.75ft -40-248f HiTmp Snsr 9.75ft -40-248 is perfect for demanding industrial environments. The Johnson Controls A99BC-300 HiTmp Snsr 9.75ft -40-248f HiTmp Snsr 9.75ft -40-248 is available with fast same day shipping and Buds Gun Shop has it in stock and ready for immediate shipment.

A99BC-300 HiTmp Snsr 9.75ft -40-248f

The A99BC-300 HiTmp Snsr 9.75ft -40-248f keeps commercial and institutional kitchen tools, freezers and other equipment cool with a high temperature sensor ensuring the proper temperature. It keeps temperatures in bounds by turning on and off at user selected intervals, protecting the environment and preventing the waste of energy and money via heat lost to surrounding areas.

Get control of your temperature with the Johnson Controls A99BC-300 HiTmp Snsr 9.75ft -40-248f HiTmp Snsr 9.75ft -40-248. No longer will you need to worry about temperature and control of hazardous or toxic applications, this balance of high temperature and low temperature will be of assistance in a wide range of applications.

With an internal lead changeover pump and permanent lubricated bearings, this Johnson Controls A99BC-300 HiTmp Snsr 9.75ft -40-248f electric centrifugal pump is ideal for transferring heating or cooling media to the building shell at high pressure.

The Johnson Controls A99BC-300 HiTmp Snsr is a 9.75ft -40-248f with a cable length of 9.75ft and a Display Range Of 9.75ft -40-248f .

The A99BC-300 HiTmp Snsr is a robust model with outdoor sensor probe, 9.75ft. lead, 300mm indoor & 500mm outdoor sensor heads, full stainless steel construction

The A99BC is a genuine Johnson Controls (JCI) 300A-9/9.75 ft, 9.75 kV heating cable with the same high quality that is commonly seen with all of JCI's products. This cable can be used in many applications such as: Residential, commercial, cable trays and HVAC piping and duct installations in dry and wet locations. Note: This heater is designed for use in air and water temperature applications up to 248 Deg F (120 Deg C).

This Stainless Steel thermometer Stainless Steel 9.75' stainless steel probe thermometer is a versatile instrument used to monitor and maintain temperatures during cooking, cleaning, freeze protection and cold storage.

Johnson Controls offers the highest quality temperature and humidity sensors available. Each sensor is accurate within -/+ 1% of the specified value.

This product will work as described, however, please keep in mind that this is not a "true" 900 watt heater. It runs at 600 watts and then turns on the 250 watt "boost" as needed. It has a built in thermostat which will turn off if it reaches the desired temperature although the unit should be vented outside to run properly.

Heat pump. Consists of a compressor, an outdoor heat exchanger and an indoor air handler. Exchanger component provides both heating and cooling through a single panel that replaces a standard forced air furnace blower motor and a separate cooling coil or condenser. Heating capacity depends on climate, installation and duct work layout.