Johnson Controls AIM1 ANALOG ISOLATION MODULE

ANALOG ISOLATION MODULE

ISOLATION MODULE Johnson Controls AIM1 is an analog isolation module that provides 1:1 voltage and current isolation and can also be used in combination with a DMX interface or other inputs/outputs. It is intended for use in environments where it is necessary to isolate the input from the output, such as where there are multiple voltage sources, or when the wrong voltage source may be present at the output.

The Johnson Controls AIM1 Analog Isolation Module is a two-channel, active device that is able to completely isolate the input and output sides of the system from each other.

1-channel Analog Isolation Module with one 2.5-kV isolation transformer and one RS-485 isolator. The AIM1 module provides a high degree of isolation between the control system and remote devices, while allowing data communication over existing twisted-pair wiring to the target equipment.

The Johnson Controls AIM1 Analog Isolation Module is the first of its kind to be UL approved to ANSI/IEEE C37.20-2007. This module was designed for use with thermometers and other battery powered devices that are isolated from the controller by a barrier or a wall, but must still maintain an accurate input signal to the controller without any potential for ground loop faults.

The Johnson Controls Aim1 Analog Isolation Module is a single channel, 100% solid state, high performance analogue isolation module. The module is capable of providing true differential and common mode isolation for low level signals.

The AIM1 is an analog isolation module that provides electrical insulation and electrical protection between two input sources. The unit is designed to allow the user to safely connect a primary power source to a secondary power load in order to prevent ground loops, voltage transients, or voltage differentials from causing damage. The module can be powered using an internal battery or a wall-mountable power supply, and it is rated for continuous duty operation.

The Johnson Controls AIM1 ANALOG ISOLATION MODULE is the perfect solution for applications where multiple signals need to be isolated from ground yet share a common reference. The module has an isolation rating of 8000 volts, is compact, and has a temperature range of -40 degrees C to +85 degrees C. The AIM1 also offers high voltage protection (up to 250 VDC) and high voltage isolation (up to 4 kVAC).

Johnson Controls AIM1 ANALOG ISOLATION MODULE The AIM1 is an analog isolation module that provides the same protection and performance as the ACI but with a low-cost solution. It is available in two versions: 1-channel and 2-channelThe AIM1 eliminates voltage drops caused by ground loops, which can interfere with sensitive measurement signals, for example, on industrial control systems. Whether you're connecting to your existing Johnson Controls analog signal or a signal coming from another source such as PLCs or other devices in your process, the AIM1 will provide high isolation performance.

Since 1990, Neuco Inc. has been a leader in the design and development of analog instrumentation for the process industry. Our product line includes isolators, amplifiers, data loggers, transmitters and interface products for analysis and control applications.