Johnson Controls CTD-C1G00-1 Current Transducer, Split, Foot Mounted

SplitCore 4-20ma CurrentSens

The CTD-C1G00-1 Split core current transmitter includes split core, 4-20mA output and is foot mounted. Its application includes solar array monitoring. The CTD-C1G00-1 is an analog current transmitter designed for use with any of the CurrentTran® line of 100V or 200V current transformers.

Whenever an application calls for a current sensor that is split core, or foot mounted, the CTD-C1G00-1 Current Transducer is the perfect solution. This unit is constructed with accuracy to meet the most demanding monitoring situations. The CTD-C1G00-1 allows you to measure current by using a 4 - 20 mA DC current source.

The CTD-C1G00-1 is a current transducer designed to sense split core fixture wires. The split core terminology refers to the fact that these fixtures are wired with the neutral and ground wire split. It consists of a 2-wire input and output connector that mechanically mates with a 4-wire mating receptacle, covered by a removable rubber boot. This allows you to connect an earth/ground conductor to the CTD in addition to the neutral conductor.

The CTD-C1G00-1 Current Transducer, Split, Foot Mounted is designed to transmit current with split core sensor. The CTD-C1G00-1 is a foot mounted current transducer and is rated at 1000A. The CTD-C1G00-1 has a 2-bolt mounting pattern for mounting on flat surfaces.

The Current Transducers CTD-C1G00 Split Core Current Transducers Foot Mounted are used with the MSP-G1A or MSP-G2C current input modules in current feedback applications. The CTD-C1G00 can be installed into a wide variety of equipment or can be shoe mounted.

For the most accurate current sensing in multiple phase power systems, choose the CTD-C1G00-1 from Johnson Controls. The CTD-C1G00-1 current sensor is designed for use in CT applications where split core or coil sensing is desired.

The CTD-C1G00-1 Current Transducer, Split, Foot Mounted from Johnson Controls measures current from DC to 30A with split core design helps to effectively isolate sensors from noise in the system.