Johnson Controls DPT2090-100G Pressure Transducer W/2' CBL

Pressure Transducer W/2' CBL

This Johnson Controls Pressure Transducer W/2' CBL translates pressure measured by a pressure plate or piston transmitter into an electrical signal, which is proportional to the pressure. The measurement range is 0-5 psi, with no dashpot.

Wish to buy a pressure transducer that can be used to measure or monitor the level of liquid contained in any kind of tanks whether they are above or below ground? Then you must opt for the Johnson Controls DPT2090-100G Pressure Transducer W/2' CBL. Offered at our company at an appreciable price, this product is of remarkable quality.

# DPT2090-100G Pressure Transducer W/2' CBL

Pressure Transducer with 2 ft CBL

Pressure transducer with 2 ft cable. Features include: Pressure ranges from 0-70 psi, 0-5 mbar, 0-7 bar, 0-14 psig, 0-175 psia, or 0-100KPa range, Accuracy of +/-5 percent of span across the indicated pressure range, Accuracy of +/-10 percent of full scale at a static pressure of 10psi/6 bar, Repeatability of 0.01 percent FSO at a static pressure of 10 psi/6 bar after 20 hours cooldown time, Includes 2 ft cable and ¼ inch MPSM connector for connection to

Designed for use in either fresh water or salt water applications, the Johnson Controls® line of Mercury Transducers is an economical way to get professional quality readings of your transducers pressure and temperature. The DPT2090-100G Pressure Transducer with 2' Cable is ideal for gauging and monitoring and is built strong and tested tough. A direct reading will gain you valuable information instantly and easily allow you to make changes if necessary. There are no coded signals to be coded or decoded just a direct read out from the HART® transmitter. This transducer is ideally used when you want a glass tube

The Johnson Controls DPT2090-100G is a pressure transducer with 2' tubing and wire leads for connection. The unique features of this Johnson Controls pressure transducer include: compact, 10 to 90 psi, 4 to 20 mA output. This pressure transducer is frequently used in oil wells and comes in a sturdy steel case with a protective cap. Feel free to browse our site for more information on the Johnson Controls DPT2090-100G and pressure transducers in general.

The Johnson Controls DPT Sensor is a standard range, single-wire IC output pressure sensor designed for OEM use. The DPT2090-100G produces a 4 to 20mA signal, and is enclosed in a nylon and polyurethane shroud. The Sensor has NPT threads and comes with a 2' connecting cable and adapter for accurate and reliable readings.

It can be difficult to ensure proper system pressure without quality measurement equipment. This is where Johnson Controls' Digital Pressure Transducer comes in. Designed with built-in functionality to allow high accuracy pressure measurement, the DPT2090-100G Pressure Transducer allows for measurement capability of 0-100 psi with an accuracy of +/- 1%.

The Series DPT2090 is a direct acting absolute pressure sensor with a nominal 4 to 20 mA output. This series has a temperature compensation of 0.010 in H2O per °F, with drift of 0.0010 in H2O max across full scale. The stainless steel sensor element is hermetically sealed into a complete stainless case assembly shaped for tether mounting through the 3/4-18 NPT port. It comes with an integral 1 in threaded body flanged at both ends for mounting on tubes, tethers, etc.

An inexpensive and easy-to-use micro system that accurately detects and promptly relays fluid pressure, or vacuum of up to 10,000 psi (70 barg).