Johnson Controls P499VAP-101K PRESSURE TRANSDUCER 0/100psi

PRESSURE TRANSDUCER 0/100psi

This Johnson Controls Pressure Transducer 0/100psi is in good condition and ready for use!

# P499VAP-101K from Johnson Controls is a pressure transducer 0/100psi.

The Johnson control P499VAP-101K Pressure Transducer 0/100psi has a flow range of 0-125 SCFH & 0-2.0 LPM. The pressure transducer can read pressures up to 100psi and generates an output voltage of 4 to 20 VDC. The Johnson Control part number for this unit is 001-7520050-02.

The 6100CURA LH-Series Pressure Transducer has the design sensitivity of 0.005" H2O/LH point. This High Performance Pressure Transducer is designed for measuring dynamic pressures from 0 to 100PSI with a maximum working pressure of 250PSI.

Johnson Controls P499VAP-101K Pressure Transducer converts pressure to a proportional or digital output from -0.3psig to +100psi. It has a swivel spool design with a 0.5" diameter, hardened stainless steel diaphragm and heavy-duty shear screw. It uses the piezoresistive method of sensing pressure using a solid state four-wire strain gauge bridge and a sealed, temperature compensated strain isolation pressure sensor.

The P499VAP-101K is a Johnson Controls 100 psi (6 bar) pressure transducer ideal for use with pressure, proportional or other low level analog outputs.

The P499VAP-101K pressure transmitter has a frequency response of 3 to 200 Hz and ranges from 0 to 100 PSI. Its measurement accuracy is 2% FS and its wetted parts are stainless steel and PEEK.

Pressure transducers are used to measure fluid pressure. A differential pressure transducer consists of two separate sensors that measure two different pressures; one is tapped into the upstream flow, and the other into the downstream flow. The difference between the two gives the flow rate. By measuring the static pressure, temperature, flow direction and density (for fluids), it is possible to determine fluid properties such as viscosity, specific gravity or API gravity using appropriate formulas.

Johnson Controls Unitary orifice design with welded, polished 316L stainless tube partially supported by an extruded 316L stainless housing provides longer term accuracy and ruggedness. Provides improved dynamic response and signals changes in pressure quickly for fast registration.

The P499VAP is an absolute pressure sensor with built-in calibrator. The sensor detects flow proportional to the measured pressure. This model can be used for applications where accuracy, repeatability and high resolution are required. It is well suited for flow measurements in liquids or gases at low or extremely high pressures, as well as for general sensing to measure process variables.

Open your door to the world of controls with Johnson Controls. Our commitment to innovation means easy, plug-and-work control solutions for nearly any application. Products include thermostats, pressure sensors, ladder logic, power distribution panels, floor boxes and indicating controls. With our broad portfolio of products you'll find the right solution for your needs - no matter how specialized. Welcome to Johnson Controls.