Johnson Controls P499VCP-105K Pressure Transducer, 0 to 500 PSI

0-500# PRESSURE TRNSDCR W/HARN

The Johnson Controls P499VCP-105K Pressure Transducer, 0 to 500 PSI is a compact piezoresistive type capacitance pressure transducer for use in low pressure applications where the cavity is encapsulated in a hard plastic housing. This transducer has been modified from the standard shear-type to provide an extended linear range and a maximum output of 500 psi in a compact size. These features make this unit particularly suitable for IMR, inlet line throttling, and other control applications where a high resolution analog output is required in a small space. This unit is hermet

The P-Series transducers are used in a variety of control systems for pressure control, over pressure trip and stop valves. The 0-500# models are specially designed for heavy pressure ranges or shock loads. Smith transmitter Model# P499VCP is used with the Johnson Controls transducer.

Johnson Controls P499VCP-105K Pressure Transducer, 0 to 500 PSI. Measures from 0 to 500 psig. 1" Mounting Flange. Output 1/2 to 4 ...

The P499VCP-105 from Johnson Controls is a pressure transducer that measures between 0 and 500 PSI. This pressure transducer uses a 4-20 mA output signal. It also has a housing material of polycarbonate, a hermetically sealed stainless steel diaphragm, and a large cylinder range of 0 to 9999 PSI.

Johnson Controls's Pressure Transducer, 0 to 500 PSI works within a temperature range of 32 degrees F to 32 degrees F. It has a deep purge flow transducer that offers accurate flow measurements in viscous or batch systems. It also features high temperature capability that rejects false readings when pushed past the limit.

A pressure transducer changes a variable physical property into a proportional electrical signal.
The P499VCP-105K pressure transducer has a 0 to 500 psi electrical output and 1/8"NPTFsensorscan be used to measure oil and water pressures > 375 psi, as well as air-hydraulic and vacuum pressures (up to 500 psi) with the P27AH accessory package.

The P499VCP Pressure Transducer has a rugged epoxy polymer case and aluminum front panel. It is non-contact and suspended (stirrup). Electrical contact is made through tubing or pipe. The sensor provides a 4 to 20 mA output signal. The rugged motor incorporates overload protection and low voltage detection for safe and dependable operation.

The Johnson Controls P499VCP-105K Pressure Transducer measures fluid pressure, temperature, and acts as a reference sensor for temperature measurement. It's rugged design is ideal for measuring high pressures up to 500#.

The P499VCP-105K pressure transducer is a 5VDC analog output that is range adjustable from 0-500psig, or 0-60.53KPa. Ideal for applications that require clean dry air or vacuum, with an operating temperature range of -40° to 150°F (-40° to 66°C). It includes a cylinder mount and high temperature sensing cable.

Pressure transducers detect and convert pressure variations to proportional electrical signals for measurement and control of pressurized fluid flow. They measure negative, positive, and differential pressures and convert them into an electrical voltage that is proportional to sensed pressure changes. They provide output at 4-20 mA or 2-10V levels and operate over a temperature range of 0° to 70°C (32° to 158°F).

The P499VCP-105K performs liquid level, liquid flow, and differential pressure measurements. It operates in a well-sealed environment and the stainless steel housing is designed to resist harsh chemical environments. The accuracy of this sensor is ±1% of full scale and the well capacity is 150 microliters (±10%). The pulse output for this sensor is 0 to 10 Vdc.

The DuraSense® brand of pressure sensors can help your organization monitor and control a variety of processes more effectively.