Johnson Controls P499VCP-105 Pressure Transducer, 0 to 500 PSI

0/500# PRESSURE TRANSDUCER

The P499VCP-105 is a 0/500 PSI Pressure Transducer. This part is designed for use with the Johnson Company's Web-Enabled Products (WEP) to provide an output signal proportional to the pressure at the process connection. The transducer has a large flexible PVC coated electrical cable rated for outdoor use to connect to a Process Control product such as Electric Actuators, Intelligent Power Modules or Electric Relay Modules  with screw clamp terminals for added durability and ease of installation.

The Johnson Controls Pressure Transducer measures pressure from 0 to 500#. The typical applications for this transducer are in the following areas:

Our Pressure Transducer, P499VCP-105 is an ultrasonic technology pressure sensor that converts a 0-500psi (0-37.7bar) input pressure to a 4-20ma process signal with a full range accuracy of 0.2% FS. It's an open circuit, so it's pressure compensated for temperature and altitude changes. The transducer has an IP68 rating. It's ideal for both domestic & industrial applications, including MAP optimization for AGVs, installations on forklifts, filling machines and UAVs.

This high performance Pressure Transducer is ideal for applications like HVAC, medical, beverage and oil & gas in the 0 to 500 PSI range. A wide variety of available signal options makes this unit easy to install into any system. The package includes 1 pressure sensor with a 6 ft. connecting cable and a 19 pin D-SUB connector.

Designed to measure pressure in a wide range of applications, the pressure transducer is easily integrated into automation and control systems with its HART protocol. The 0-500 psig pressure transducer allows pressure measurement in a variety of industrial applications such as process control, automated equipment monitoring, irrigation systems, building automation systems, and oil well servicing.

The Johnson Controls P499VCP-105 pressure transducer, 0 to 500 PSI is a great product for any HVAC applications that require accurate measurement of pressure in a compressed air or gas supply. The P499VCP-105 is a cost effective instrument that allows you to monitor compressed air or gas supply, giving you complete control and maximum safety on your system.

The Johnson Controls P499VCP-105 Pressure Transducer provides accurate signal conditioning for applications where the sensor is on a single line (probe) that can be connected to a pressure transmitter at one end and a single-line process controller at the other end. The P499VCP-105 has an operating range of 0 to 500 PSI. It converts voltage from the probe element into an electrical output signal or digital input using a three-wire serial interface. This accuracy pressure transducer has a frequency response of 15 to 35 kHz, features excellent shock and vibration qualities, and is housed in stainless steel.