Johnson Controls F-1000-17 3/8"M X 1/4"F BRASS BUSHING

3/8"M X 1/4"F BRASS BUSHING

The Johnson Controls F-1000-17 3/8"M X 1/4"F BRASS BUSHING is a replacement part used to hold equipment together. It can be installed though holes or between parts and is ideal for maintaining fluid lines and electrical connections.

The Johnson Controls F-1000-17 3/8"M X 1/4"F BRASS BUSHING is an aftermarket product that can help you build your own system. It is to be used with Johnson Controls brand HVAC equipment only.

Johnson Controls F-1000-17 3/8"M X 1/4"F BRASS BUSHING

Johnson Controls | F-1000-17 3/8"M X 1/4"F BRASS BUSHING

Johnson Controls F-1000-17 3/8"M X 1/4"F BRASS BUSHING. For use with a control box or junction box. Santoprene rubber shock absorbing grommet designed for heavy duty applications. 18-8 stainless steel bushing eliminates corrosion caused by corrosive fluids and...

Designed for 0-1000 PSI, the F-1000 Series brass bushings are a patented alternative to other bushings not rated for a working pressure over 250 PSI. Buna N/Nitrile seals have been extensively tested.

In industrial applications or home maintenance, no parts replacement should ever be delayed by the lack of a threaded bushing. Johnson Controls Interrupt Brass Bushing is designed to keep you working when others can't. It can handle tough jobs that would quickly destroy most other bushings. The durable brass construction with nickel plating resists corrosion and rust that can damage threads in tough environments like industrial sites. It withstands heavy loads, even in freezer applications where stainless steel housings can creep closed and crush plastic bushings.

Flexible - Improve the capability of your existing control system by integrating a simple-to-install 3/8" I.D. thermostat tubing in any location within a pipe run.

It is a connector designed to facilitate the passage of one piece of threaded rod into another threaded rod, or into a tapped hole. This particular style of bushing has an external diameter that is 0.378” (inches). The main purpose of the connector is to provide friction between the male part and the female part during rotation, so as to improve the longevity, operation, and effectiveness of the component.

Brass ball valve stem with bushing, non-rising stem designed to withstand differential pressure in excess of 450 psi, EPDM rubber grommet, stainless steel retainer clip for fast and easy installation.

Controls F-1000-17

Simply the best way to complete your plumbing installation is with a quality pair of compression fittings from Johnson Controls. The F-1000 series consists of a C-1000 female Compression adapter and C-1000 male Compression adapter. For maximum flow, add a water-reliant THERMAL WRAP® insulation sleeve around the fitting before installation...