Johnson Controls F-1000-323 1/4" OR 5/32" BARB PLUG

1/4" OR 5/32" BARB PLUG

Controls F-1000-323 1/4" OR 5/32" BARB PLUG

PLUGS, 1/4" OR 5/32" BARB PLUGS

Johnson Controls F-1000-323 1/4" OR 5/32" BARB PLUG is a great product. One of the many key features for this product is the 1/4 inch 1/4 inch barbs. Additional features include things like plug made of brass. The product number for this excellent part is JCI F1000-323.

The Johnson Controls F-1000-323 1/4" OR 5/32" BARB PLUG is designed for use with JCI HD Display Board. For use in controlling indoor temperature in large buildings. Easy to adjust, easy to install.

The Johnson Controls F-1000-323 1/4" OR 5/32" barb plug is easy to install and comes with a rubber gasket, metal lock nut, and mounting screw.

Connect one end of your wire into this 1/4" Barb Plug or 5/32" Barb Plug then into the Nema 6-50 plug. Fits most Johnson Controls on-off switches. Used for switching on and off pumps, motors, etc. Quantity: 3.

The 1/4" and 5/32" Type C Barbed Plugs make it easy to quickly and safely connect and disconnect your lines—from the hose bibs in your home to the water heater, washing machine, or other source of water. Thanks to the Triple Seal Technology™ (TS3) built into each plug, you can be confident that your connection will hold strong against the pressure and debris that comes along with everyday use.

The F-1000 Series 1/4" or 5/32" barbed plug is designed for use with the G-5000 Multi-Purpose Gauge. The F-1000 series are constructed of high impact resistant polycarbonate. Available in 1/4" or 5/32" quick connect style barb.

A two-piece nylon plug can be mounted in either 1/4" or 5/32" tubing. The internal seals are molded in the plug for longer life. The internal o-ring permits some isolation of fluid pathways at low pressures. Maximum pressure depends on the wall thickness and pressure rating of the tube.

Primary use for this product is to seal ductwork where air conditioners are installed. It is used in the stem of the screw clamp. The cap is held by a screw so that it can be screwed onto the inside of the duct, and it creates an air tight seal.

The Johnson Controls F-1000 Series of plug valves is a compact, low maintenance solution for a variety of flow control applications. These cost-effective flow plugs are hydraulic balanced for smooth operation, and require minimal effort to close. They feature durable covers that protect pneumatic components from contamination or damage, durably crafted from rugged cast steel with a satin finish for corrosion resistance.

The F-1000 series is ideal for transferring gas, diesel fuel, biodiesel, or ethanol by gravity flow or pressure through grain tanks, dip tanks or other similar vessels.