Johnson Controls F261MAL-V01C "FlowSwitch 1"" Nema 4" "FlowSwitch 1"" Nema 4"

"FlowSwitch 1"" Nema 4"

The F261MAL-V01C "FlowSwitch 1"" Nema 4" is part of the Power Density Series and the series is designed with professional solutions in mind. The "FlowSwitch 1"" Nema 4" is ideal for automatic toilet paper dispensers or as a replacement part for devices that use pumps for liquid flow control.

The Johnson Controls F261MAL-V01C "FlowSwitch 1"" Nema 4" has an integrated flow switch that can be used in many different configurations for a variety of applications. This configuration is suited for applications where a flow switch can be placed between two independent circuits and flipped "ON" with the use of a switch.

The SCP's F261MAL-V01C and F296MAL-V01C "FlowSwitch™ 1"" Nema 4" are both UL Listed as a complete backflow prevention assembly. This component is in the dual check valve family for use only when an air gap or horizontal stop valve configuration is specified by the authority having jurisdiction. They provide positive isolation of plumbing systems from drinking water reservoirs and have high flow characteristics for optimum performance.

FlowSwitch 1"" Nema 4" The F261VX100 Power8 VFD incorporates our patented Advanced Converter Technology (ACT) which provides highly accurate flux/frequency control with zero steady state error. It is designed to meet the requirements of the North American Electric Reliability Corporation (NERC) reliability standards for Essential Energy Service and Common Energy Service applications. In addition, it also meets the requirements of IEEE Standard 1547-2003, IEEE Standard 1139-2006 and ANSI C37.111.

The F261MAL-V01C is a NEMA 4-rated 4-20 mA signal FlowSwitch, suitable for explosive gas or vapor environments. It uses a molded elastomeric actuator with 10 ft. (3.05m) cable to actuate flow indicating contacts in the field wiring. It is also available with an optional external remote indicator switch with short cable to allow remote indication of supervisory conditions. This FlowSwitch is available in VOC versions to measure H2S when indicated by the required suffix (V02C).

The FlowSwitch is a patented, compact, electromagnetic flow sensor that has no moving parts and requires no special mounting mechanism. It's made of CNC machined aluminum and is available in a wide range of pressure ranges. There are many possibilities to incorporate the switch into customized designs that meet your needs. Now with the latest technology for the water, waste, ventilation, air monitoring industries!

The F261MAL-V01C by Johnson Controls is a type of flow switch, this device is used to monitor the flow and level of fluids in process systems across multiple industries including power, petro chemical, and pharmaceuticals. The flow switch can also be used as a limit device in motor applications where flow monitoring and fault detection is required by overriding a contact to indicate abnormal conditions such as over current, under voltage, short circuit or other related events.