Johnson Controls FTG13A-600R 1/2 CLOSE TANK CONN FOR TEMP. CONTROLS (packing nu -

"1/2""TANK CONNECTION 150# MAX."

This 1/2"" FNPT tank connection has a 150# maximum working pressure and also includes a stainless steel gasket. This type of connection is used primarily on hot water tanks, although it can be used in a wide range of applications requiring a copper pipe to connect with a pressure vessel.

The Johnson Controls FTG13A-600R 1/2"" Tank Connection is for use with Temperature Controls.

Use this 1/2'' compression fitting with 1/2'' OD tubing for connecting a water source to your temperature control tank. This fitting is specifically designed for Johnson Controls temperature controls and is rated 150# maximum burst pressure.

This is a 1/2"" nipple. It is used to connect a copper manifold to a process tank for temperature control using peristaltic pumps with a 150# maximum load.

High quality closed tank connection. Liquid feeding line is fully leaded. Thread size is 1/2 pipe NPT. System design pressure of 200# with a burst strength of 600#. Max. system temperature of 140F. Safe operating pressure range 60#-150#.

Now you can have a tank connection that will allow a hose to be connected for a few minutes or a few hours, based on your system needs. With a twist of the valve, the connection is either open or closed. It's simple.

Connect temperature control equipment to this heavy-duty 1/2" NPT pipe thread union with straight female 3/8" NPT adapter and nuts. Union body is constructed of seamless drawn brass, for superior strength and long term durability. Union allows you to easily change out the temperature control equipment as needed.

The FTG13A-600R temperature control is designed for a 1/2" IPS connection.

Get the right fuel outlet with this Johnson Controls FTG13A-600R refrigerator accessory. Connect a flexible line to a tank and transfer fuel from a larger, more convenient fuel source. This Johnson Controls FTG13A-600R is designed to work with a number of different products, and helps you meet specific legal requirements for certain states.

Here is a metal fitting for use when fitting or connecting 2 copper pipes, tubing or hose for temperature control. It is in good condition.

"Control valves and manifolds made of non-corrosive polypropylene for indoor use.."

The new FTG13A-600R is the updated replacement for the FTG104. The FTG13A-600R can be easily installed on just about any tank, including existing tanks that have been in service.