Johnson Controls M9102-IGA-3S - - Floating Actuator, 18 Torque

24v OnOff/Fltg 18# 30SEC NSR

The Johnson Controls M9102-IGA-3S - 3 Position On-Off/Float trip actuator, with a Torque of 18lb-in at 30 seconds, is designed for use with Johnson Controls Solar Lanterns.

The M9102-IGA-3S Series Float Actuator is a direct mount, horizontal actuator. It accommodates small to moderate flow control valve applications and is rated for 18 inch pounds of torque @ 30 seconds. The series includes 1/8 inch NPTF ports with a .040 Female Pipe Thread (FPT) Port.

The Johnson Controls M9102-IGA-3S Floating Actuator is designed to control the pressure level in refrigerant piping applications. It includes a clip to secure the lever assembly in place. This power source operates at 24v and includes both a SPST electrical contact and normally open solenoid coil. Includes an adjustable stop to give you better control over the movement of this floating actuator.

The 9102 Series M9102-IGA-3S 18 Torque includes a standard sliding actuator with the internal gears removed. This float type actuator can be used for applications that require the valve to be fully open or closed. The entire surface is stainless steel, except for the pulley that has a bronze bushing to prevent wear.

The M9102-IGA-3S?? is a 24vdc, floating actuator. Actuators in series can be returned to neutral position with minimal force and when the load ?..

The JCI actuator is a 24V, 0.2HP actuator with 3-phase interconnection designed to meet UL/CSA, IEC and NEMA requirements.

The Johnson Controls M9102-IGA-3S floating actuator is specially designed for use with all Johnson Controls solenoid valves in an open position. The timing of your valve system can be precisely controlled because the time delay is factory preset