Johnson Controls M9208-GGA-2 Electric Actuator, 70 in.-lb.-40 to 140

24V S/R 0-10VDC W/Plenum Cable

The Johnson Controls M9208-GGA-2 Electric Actuator, 70 in.-lb.-40 to 140 is a 24V S/R 0-10VDC W/Plenum Cable that is designed for the purpose of electric actuators. It operates with a signal range of 0-10VDC and is rated to produce 70 in.-lbs. of torque at 140 deg

This Johnson Controls M9208-GGA-2 Electric Actuator, 70 in.-lb.-40 to 140 Vacuum, 70 in.-lb. from Grainger helps you to move heavy loads effortlessly. This electric actuator is ideal for retrofitting existing equipment and will allow for precise motion control over a wide variety of applications. A range of 0-10VDC wiring capability provides simple installation and compatibility with a wide range of controls.

The Johnson Controls M9208-GGA-2 electric actuator is a component that mechanically moves devices outside of the home or building that require powered assistance from inside or from a distance. This device comes in a non-plenum and plenum version and can be used for wood windows and doors. With an operating voltage of 24 volts, this actuator runs on a single input and can move with up to 30 inches per second.

The M9208-GGA Series, 24 VDC single-ended actuator with short circuit and reverse polarity protection, provides linear motion using an AC magnetic field. Embeddable in a panel, the P4 flange does not provide air flow and has integral terminals for connection to control circuitry.

DC electric actuator delivers fast, efficient, remote control for HVAC rack mounting applications. With a minimum travel of 13/4", a NO-OFF position and a 24 VDC voltage rating, this heavy duty actuator is well suited for commercial and industrial light-duty actuator applications.

The Johnson Control M9208 Prevents Pneumatic Actuator and Control Block (70-in.-lb. Central for 24v) .

An electric actuator in a single phase configuration. The M9208-GGA-2 is adjustable from 70 in-lbs to 140 in-lbs with a maximum speed of 15 in/min. It is capable of switching currents up to 10VDC and has a maximum throw distance of 20 in.

The Johnson Controls® M9208-GGA-2 electromechanical actuator is intended for use in commercial refrigeration equipment. It may be used in combination with Johnson Controls® M9203, M9203D, M9205, M9412C, G5202, G5203, G5204 control valves when the control valve outputs are 24 VDC.

This Johnson Controls M9208-GGA Series 2 Position 3 State 1 Form C Air Actuator with 1/8" NPT connections from the Direct Drive Series is a pneumatic device used to transfer force from a power source to a mechanism, machine, structure, or vehicle. This actuator will provide a continuous lifting force dependent upon the air source pressure and the setting of the valve.

"Thanks to Johnson Controls Actuator family of products, I am now able to remotely actuate the chiller on my new hotel project. This enables me to stay on site and keep an eye on things at all times. This latest model is the best yet!" --Jay Schutt

A high efficiency springless actuator for electric strike applications. Originally designed for the door strike channel in commercial aircraft doors, this actuator has a long history of reliable service and a proven track record for applications requiring a fail-safe energy storage device. Designed with a grooved plastic body capable of storing 70 in.-lb., the M9208-GGA-2 is rated at 40 to 140 VDC and features a rubber boot and jam nut.

The NEW M9208-GGA-2 electric actuator from Johnson Controls is designed for low and medium horsepower applications and meets the demand for higher performance and lower cost. Benefits include: