Johnson Controls M9220-BAA-3 Electric Actuator, 24 to 57 sec.120VAC

120V S/R 2pos ACTR 177inlb

The M9220-BAA-3 is a 24VDC control linear actuator, 120VAC standard and rated to 177lb. It has a 2 position heavy-duty actuator that offers smooth travel and lifting capabilities. This product is designed as a replacement for motors that fail in HVAC systems and other control applications requiring a linear actuator.

Lightweight, economical hydraulic advantage actuator is designed with the features and quality of a precision electric actuator at a fraction of the cost. Capable of operating in either pressure or regenerative mode. Double acting with combined linear and rotary position capability in 120V (50/60 Hz) and 240V (50/60 Hz) single phase.

This Johnson Controls M9220-BAA actuator is a 24 to 57 sec. with a 120V Single-Range Actuator. It has a 3 Phase Wall Mounted, and a Die Cast Housing. This product is unique in that it is not for residential use or for control of HVAC or refrigeration equipment.

Johnson Controls M9220-BAA-3

The Johnson Controls M9220-BAA actuator is ideal for activating hydraulic cylinders in many applications, including construction, agricultural, truck, mining, and material handling. The Johnson Controls 12x24 DC42122-2324V Holmatic SmartDrive unit incorporates 3x Holmatic DC electric pump, the latest in battery technology. It can be easily programmed to eliminate uncontrolled pump run times.

The Johnson Controls Electric Actuator is 120V and has a 24-57 sec. range.

The Johnson Controls M9220-BAA-3 motor is a steel reinforced design for use in narrow aisle pallet racking. It is a full wave design with a 7 percent voltage tolerance and a current rating of 2.2/3.7 Amps. It measures 53" in length and can be used in locations that require up to 300 pounds of force.

The M9220-BAA-3, Johnson Controls Electric Rate Actuator, 24 to 57 sec., 120VAC. This electric rate actuator has a voltage rating of 120V , an amperage rating of 10 amps, a frequency rating of 60Hz , and a lead wire configuration of M6-. The actuator has 5 contacts and a plunger stroke of 3/4" . Johnson Controls is one of the largest manufacturers in the HVAC industry producing heating, cooling, ventilation, air conditioning, indoor air quality products for residential, industrial, commercial and automotive applications.

The M9220-BAA-3 Johnson Controls Electric Actuator supplies 24 to 57 seconds of operation. This 24 VDC H-Bridge position actuator is enclosed in a compact, NEMA 4X/13 or NEMA 4X/IP65 plastic case and has a 3 meter cable with quick connect terminals.

The M9220-BAA-3 Electric Actuator is a 24V DC to 120V AC/DC electric motor drive. This part enables 24V static magnetic actuators to be used on a voltage from 120VAC to 240VAC.

Bold and strong, the M9220-BAA-3 Johnson Controls electric actuator is a back-drive unit from one single control source. The M9220-BAA-3 actuator is a cost effective solution for mechanized doors, gates, and windows requiring very high cycle life. It can achieve up to 4 million cycles.

A remote control actuator is an electric actuator that is mounted on the outside of a structure to be operated remotely. The actuator is plugged into an electrical outlet or junction box, and controlled by a switch or control circuit located inside the building.