Johnson Controls M9300-2 External Aux Switch Kit 2xSPDT

External Aux Switch Kit 2xSPDT

The kit is designed to attach to the front of a Johnson Controls standard transmitter. It will allow you to switch channels on any transmitter you have that has external aux outputs, just like the LightForce transmitters. This kit includes an external aux switch box and two 2-terminal (SPDT) switches with connecting wires. They operate independently of each other and are spaced for easy selection with your thumbs without taking your hands off the steering wheel. The switches can be used with any receiver or transmitter with external auxiliary outputs and are not limited to being used with our receivers or transmitters .

Add an external auxiliary switch to your Johnson Controls potentiometer for added versatility. The kit comes complete with a 2 x SPDT switch, wire leads and terminals. Also included is a 12-Volt external actuator with a 1/4-inch plug. The kit provides you with everything you need to add an external switch to your Johnson Controls potentiometer.

The M9300-2 is an external auxiliary switch kit for the M9300 series of temperature controllers. It provides a 2 SPDT switches to provide operator interface and control of the controller. The unit can be mounted in any position on the enclosure and has integrated terminal blocks for making electrical connections to both switches as well as the controller. The units can be mounted back to back or side by side in various combinations (as many as 3 units).

The M9300-2 External Aux Switch Kit 2xSPDT from Johnson Controls is an external auxiliary switch kit for the M9300 Series Tempered Glass Heated Humidifier. It includes two SPST rocker external switches. This kit is intended for use with On/Off, Low and High Only humidity control panels.

The Johnson Controls M9300-2 External Aux Switch Kit 2xSPDT is designed to allow external control of the heating or cooling system. This switch kit can be used with heat pump, heat pump/air conditioner and air conditioner systems. The M9300-2 switch kit can be used in one or two-stage systems, reducing the need to purchase multiple kits.

The Johnson Controls M9300-2 External Aux Switch Kit 2xSPDT is designed to control external devices and accessories. This Aux Switch Kit is packed with a variety of options to control external devices, including smoke detectors, alarms, door locks, lights, and HVAC systems. It gives you the flexibility of using individual switches for each device or using one switch for multiple devices.

M9300-2 External Aux Switch Kit 2xSPDT provides an additional two external auxiliary switches that can be configured and mounted in any location within the Johnson Controls Building Automation system. The module comes with two SPDT switches, 10 feet of cable, switch mounting hardware and instructions.

2-SPDT, 6A,120/240VAC, Full Load Amps: 6A. Maximum Switching Power: 48W.

Digital Addressable Switch

The Johnson Controls M9300-2 External Aux Switch Kit lets you operate your HVAC system from a remote location. It is designed for use with the M9300, M9500 and M9800 series MiniCom® thermostats. The kit is easy to install, maintenance free, and can be mounted in any orientation (horizontal or vertical).