Johnson Controls M9310-HGA-2 - - 24VAC/DC Floating 1 SPDT or 2 SPDT Damper Actuator, -22 to 140 F, 89 in.-lb., 90 sec.

24V 88#IN NSR 90SEC DAMP ACTR

Experience Johnson Controls' M9310-HGA Actuator. This 24V 89#IN x 90 SEC damper actuator can fit virtually any application; it can be used for a wide variety of new and old commercial establishments. This 24VAC/DC motor has a SPDT or a DPST function and it has 4 different positions that can be done simultaneously, depending on the switch being used. It is lightweight at 2.2 pounds, which allows for easy installation, while still maintaining its rugged durability.

The M9310-HGA-2 provides two SPDT or one SPDT controls, 2/2-wire floating level control and uni-directional valve actuation. The 24VAC or 24VDC, 89 in.-lb., 90 sec. control can be interchangeable with traditional 208 to 277 VAC control for up to 4 wire, 2/2 wire applications with no external transformer. Controls can be used for VAV systems installed with steam heating to maximize energy efficiency. Motorized damper controls are available for Zone System applications where the air distribution to one room is required at a controlled temperature while the

The M9310-HGA-2 24VAC/DC Floating 1 SPDT or 2 SPDT Damper Actuator, -22 to 140 F, 89 in.-lb., 90 sec.

Johnson Controls M9310-HGA-2 - 24VAC/DC Floating 1 SPDT or 2 SPDT Damper Actuator, -22 to 140 F, 89 in.-lb., 90 sec.

The Johnson Controls M9310-HGA-2 is a 24 VAC/DC floating 1 SPDT or 2 SPDT damper actuator used for limited speed applications, such as exhaust hoods. The Johnson Controls M9310-HGA-2 is made of plastic material and is designed to have a life of 44,000 cycles. It has a braking torque of 89 in.-lb., an operating temp. range of -22 to 140 F, and a holding current of 90 sec., with 70% RH. It features an LED indicator light that monitors control power.

Designed for fire detection and control applications, the M9310-HGA-2 is a medium duty, 24vac, 2 SPDT actuator that operates at 89 in lb/90 sec. and can support up to 4 wire resistances. The unit can be used for single or dual mounting (1 to 4 circuit application). The external pushbuttons can be used to provide a manual override on any of the SPDT functions.

An expertly engineered motor with UL Listing, the M9310-HGA-2 is suited for applications requiring high ambient conditions. Compatible with 5/8 in. thick frames, it can be used in a damper, fan or other application that requires an adjustable resistor and a soft start. This heavy duty unit can perform any operation you require, including: