Johnson Controls MP823C001A , Inc. MP82 ACT/YOKE ASSY 3-6PSI

"3-7# ACT 3/4""STROKE W/MTG KIT"

The MP823C001A is a 3 to 7# Actuator, Double Sided, Fixed Pressure, Double Tapped Full Load Valve (FV) - (4) Included. Johnson Actuator Device Type: ACTS. ACT Type: Manual. Rotation: Counterclockwise. Refrigerant Type: Air. Max Pressure: 7 psig @ 70° F (21° C). Number of Stages: 1. Rated Current / Phase (Amps): 10 A. Flow (SCFM): 480 CFM at 3 psig 3/4"" Stroke Sta-Kool Plus

Our Act mounting yoke offers smooth actuation and installation. The Yoke assembly with 3-6# ACT and the MTG kit provides a compact mechanical package that is ideal for either multiple or single actuator application requirements. (Actuator sold separately)

Our new 3-7# ACT/YOKE ASSY with 3-6 PSI for zero to 7,000 produces the most pressure of any product on the market today. It has a ductile iron main body with brass swivel and yoke assembly. This is very durable and produces consistent outputs every time. It comes with fittings, both male and female quick disconnects, sensors, manifolds , gauge set, gauge plate, tubing , manual blow off valve, mounting hardware , electrical release box , etc .

Ampa designed the MP82 Act/YOKE Assembly to work with any gas or air powered air compressor with 3-6 psi. This is an actuated "All"Position rubber yoke assembly. It will provide the actuation for most of your equipment requirements.

The Actuator Assembly is designed for 3-6 PSI actuation.

The ACT valve is a single-stage direct drive diaphragm-type pneumatic actuator that is designed for air supply applications. The valve features a stainless steel body, an internally lubricated stainless steel piston, and a high load/low flow capability.

The Johnson Controls MP823C001A Actuator gives you optimum performance and high durability for uninterrupted operation with superior action and smooth movement. It is constructed from high-quality brass and has never been assembled before. As a consequence, this actuator is the ideal choice for the application of adjustable flow rates with external diaphragm pump.

Pump Assembly Designed to be mounted on the end of a flow line, the all brass pump assembly is ideal for use with vacuum cleaning systems or any flow-through application that requires an extremely low flow rate.

These Actuators are a great replacement for worn out or damaged units, and repair kits are available if the solenoid is still functional. These units have been tested and verified to ensure they operate correctly prior to being placed on any shelf.

Want a compressor with simple, one piece controls? Look no further, because our MP823C001A is your solution. It features a convenient 0 to 5000 psi pressure range, maintenance free wear sleeve and internal anit-vibration mounts that provide added durability and noise reduction. This compressor is a must have for professionals and DIYers alike.

The Johnson Controls MP823C001A, Inc. is a product used often by consumers during their daily lives, but they may not know the product name. This description would help them find that product easier, but at first glance it's difficult to determine what each feature does if you are unfamiliar with the device.

The Power Pressure Actuator Assembly 2-3/4 to 3-1/2 PSI is used with the Johnson Controls Standard Modulating Gas Valve 100-690, 100-694 and other JCI or other branded gas valve models