Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/C

Network Sensor w/Display, W/C

The Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/C is a great solution for security system integrators. The sensor is a long range wireless transmitter that can send and receive data from up to 1500 feet away. You will have the ability to control and monitor your security system from your computer or mobile device using Honeywell Total Connect. At night the Johnson Controls sensor has built in photocells that activate when it gets dark, turning on the light emitting diode (LED) which illuminates up to 10,000 square feet.

Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/C

Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/Case

The Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/Controller is a sensor that monitors and reports temperatures, humidity, and dew points over an IP network using BACnet. The NSB8BTN1400 includes a built-in microcontroller which provides support for the BACnet protocol.

When choosing a Johnson Controls network sensor, you can be confident that you are working with the most comprehensive line of quality sensors available today. From wireless gas and water, to smart home and commercial building controls, we have the right solution for your application.

The Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/C is a Network Sensor with Display. It has the ability to measure between -20 and 120 degrees C and includes an integrated 2-line x 20-character LCD display. The temperature sensor features a total of 8 inputs, 2 circuits for Pt100 RTD sensors that are fully DIN compatible and 4 circuits for thermocouples that are also fully DIN compatible. The temperature sensor also has a number of user configurable alarms and outputs.

The Johnson Controls NSB8BTN1400 Network Sensor with Display, W/C is a digital temperature sensor designed for use with the Johnson Controls BACnet IP Bridge. This sensor is compatible with any BACnet-IP based Building Automation System and can be used to monitor temperature and humidity in HVAC zone valves within commercial buildings, offices, shops and warehouses. The sensor will send alerts to the building control system when the measured values fall outside of user-defined bounds.

A wireless indoor-outdoor sensor that works with the NST system. It has a built-in LCD display and an RJ11 jack for connecting to an alarm control panel. The NSB8BTN1400 is easy to set up and will automatically adjust its settings based on the outdoor temperature, adjusting your thermostat accordingly.

The Johnson Controls NSB8BTN1400 is a Network Sensor w/Display, W/C. It features a built-in blast sensor and operates in temperatures from 14 to 140 degrees Fahrenheit.

The Johnson Controls NSB8BTN1400 Network Sensor w/Display, W/C allows you to connect your latest appliances to the Internet while keeping a close watch on your carbon footprint. The NSB8BTN1400 is compatible with a wide assortment of equipment including water heaters and furnaces.