Johnson Controls P100CP-164 450#Opn250#Cls SPST-Auto PrSwt

450#Opn250#Cls SPST-Auto PrSwt

This Johnson Controls P100CP-164 450#Opn250#Cls SPST-Auto PrSwt 0.05A 480VDC Pushbutton Timer is one of the top sellers in the Timer Switches category online.

The Johnson Controls P100CP-164 450#Opn250#Cls SPST-Auto PrSwt is a NEMA 1 style short throw preset single pole single throw alternating current normally open/closed positive ground switch rated to 250 Amps at 120 Volts AC.

The Johnson Controls P100CP-164 450#Opn250#Cls SPST-Auto PrSwt is a 12V DC - 65 watt SPDT miniature pressure sensitive switch. The body power rating is 450 amps, 250 amps continuous current at 30 deg C ambient temperature. It has a standard paddle type actuator and a silver plated copper control terminal.

The Johnson Controls P100CP-164 controls a variety of HVAC application from code required open, close and stop positions to full time positions. Open loop control can be accomplished using a mechanical linkage or a micro-switch with magnetic sensing.

A true workhorse relay, this rugged contactor offers an exceptionally long service life and can carry a full 250 amp load. Supply voltage: 120/240 VAC; Current capacity: 5A; Contact rating: 1/4"; Relay contacts: 1NO 2NC; Ratings: 450 Amp at 240VAC, 250 Amp at 120VAC, 2500VAC/60Hz 5kVDC (rms) 500kA (IEC); Features: ODP (Overload Protection), CDC (Current Decay Control), Encoding type M6, "B" Indexing

The Johnson Controls P100CP-T7C is a two position, air operated thermostatic limit switch that mounts to the actuator of Johnson's 2 Position Stand Alone Contactor. The P100CP-T7C will open at 175°F or 322°F depending on which position it is set.

The Johnson Controls P100CP-164 is a single pole, three throws, snap action solenoid with built-in pilot light. It has an operating voltage of 115VAC.

The Johnson Controls P100CP-164 is an intrinsically safe explosion proof switch designed for use in accordance with NEC articles 400 and 500 for hazardous areas. These switches are used in hazardous areas where there is a potential for explosion or flammable gases, vapors or dusts.

The Johnson Controls PanelView 1000 system is a three-in-one communication and control solution that offers the speed, hardware expandability and software functionality you need to improve communication across your facility or site. While communication between devices may seem straightforward, it's the communication within these devices that determines their performance – and ultimately your productivity.

The GENTRON P100C is a solid-state circuit breaker using totally enclosed, oil-filled vacuum breakers. The unit is an automatic 30 A to 450 A instantaneous size 2 device without trip test.

The Johnson Controls line of solenoid valves provides an ideal solution for a wide range of applications where precise flow control or proven valves is needed. The P100 Solid Valve is a general-purpose, normally closed positive-acting valve designed with atmospheric ports and a seating surface that will not flow air even when the valve is "open". It's thermoplastic construction provides good chemical resistance and allows the valve to be used as a check valve.