Johnson Controls P170AA-118 100/400# OPEN-LO PRESSURE SW.

100/400# OPEN-LO PRESSURE SW.

Our P170AA-118 100/400# OPEN-LO PRESSURE SW. is a single station air valve designed for use with Johnson Controls pressurizer package containing OA391AA-119. This product was made to work with Johnson Controls 100/400# Open-Lo Pressure Switch. In addition this product supports the design of the system that consists of OA325AA-112 , OA335AA-117 , and OA350AA-128 . Our Spring Loaded Pressure Reducer is designed to reduce the air pressure on the package to a safe working pressure.

This is a new sealed in an original box 100/400# OPEN-LO PRESSURE SWITCH. Part number for this is P170AA-118.

The P170AA-118 100/400# OPEN-LO PRESSURE SWITCH is a common safety part used in equipment such as: Pressure Guns, Copiers, Indicating Cylinders, Laboratory Equipment and Filling Machines.

The JohnsonControls P170AA-118 100/400# OPEN-LO PRESSURE SWITCH is small in size, making it right for any application. The product comes with 1/8" NPT conduit fittings that are made to endure many years of use. The product can be used in an explosion proof environment, as well as any other application that needs a switch to protect against hazardous conditions. This product is designed for mild steel plate thickness between 1.0mm and 10.0mm. Typical temperature range for this switch is -18 degrees to 121 degrees Celsius (-0 degrees to 250 degrees Fahrenheit).

The Johnson Controls P170AA-118 100/400# OPEN-LO PRESSURE SWITCH is a direct replacement for your existing high pressure switch. The switch has continuous time adjustment, allowing the user to create the desired time delay to prevent over acting. This pressure switch is Easy installation with 3/8" inlet and outlet ports using the one piece connection that contains gasket, screen, and post. It also features an operating pressure of up to 400# open to 125# closed graduated scales in psi, pascals, kPa/mbar/kpsi.

The Johnson Controls 100/400# OPEN-LO Pressure Switch is a safety device in pneumatic conveying systems for automatic shutdown in the event of load and gate valve failure. The switch detects loss in pressure and activates a safety device to stop the system. The unit is available in 100 and 400 lb. settings.

The JCI P170AA-118 100/400# OPEN-LO pressure switch has a rating of 30.4 VDC and a 0 to 85% rel. humidity. The JCI P170AA-118 is to be used with electric compressor

Johnson Controls Pressure Switch, Open Loop, 100#@400 psig, 125 Degrees F, Sp/Nema 1 Inlet, 2 Circuit, Straight Back , 3/4 In Npt Male Inlets Stafford NJ Staff-Line Products # P170AA-118

With this Johnson Controls pressure switch, you can easily apply or disengage pressure control in a variety of automated systems. Using a maximum 400 psi and a minimum 100 psi, you can trust the quality and safety of this unit in all situations.

The Johnson Controls P170AA-118 is a ¾ HP pump with 4" outlet. It comes with a 3/4 x 5 inch reducer, and is pressure switch operated. It has a 90 PSI Gauge, and an AL outlet.

Our Monitor Series delivers the quality, durability and dependability you expect. This Small Electric Actuator can be used for a variety of applications including air bill, air cocks, air cylinders, blowers , valves and more.

The new P170AA-118 is an energy efficient PCP-Pneumatic controlled actuation system. This actuation system effectively replaces the manual pressure relieving valve. The pneumatic actuation system provides considerable cost savings, creates more breathing capacity within the power plant, and reduces the number of components required on the tank top. It also reduces the total weight of equipment resulting in fuel savings by decreasing engine load and extending engine life.