Johnson Controls P170EA-14 , Inc. P170EA14 12"/80# 5-35# ADJ DIFF

"12""/80# 5-35# ADJ DIFF "

The Johnson Controls P170EA-14, Inc. P170EA14 is a 12""/80# 5-35# ADJ DIFF

Johnson Controls' P170EA-14, Inc. 12""/80# 5-35# ADJ DIFF call for a price quote designed to be simple to operate and provide output adjustment from 0% to 100%, from 0°F up to a 50°F temperature differential, and a maximum hookup capacity of 80,000 Btu.

Complete 12"" x 80# 5-35# ADJ DIFF

The Johnson Controls P170EA-14 , Inc. P170EA14 12"/80# 5-35# ADJ DIFF is a 14" x 12" x 8" and it weighs precisely 10 lbs.

The Johnson Controls P170EA-14 , Inc. P170EA14 12"/80# 5-35# ADJ DIFF is the perfect choice for your traditional home. It has a thickness of 0.75". This model can be mounted at any angle between 0 and 180 degrees (or 0 and 90 degrees using the included stop).

Johnson Controls' P170EA-14 , Inc. P170EA14 12"/80# 5-35# ADJ DIFF is a 12" differential Pressure Gage With 0-2000 psi Gauge and -500 to +500 psi Dash with 4"" Dial

With the new JCI®-P170EA-14 , Inc. P170EA14 12"/80# 5-35# ADJ DIFF, expand your capabilities by adding a Johnson Controls® electric actuator to your hydraulic or pneumatic cylinders. Incorporating a new style design, it's offered in an attractive, compact package with click-on head caps for easy positioning and adjustment of the actuator. These actuators utilize a tie rod type grease fitting and a grease fitting on the side of the piston rod for added convenience and will fit a wide range of cylinders from 3/4" thru

The P170EA-14 , Inc. P170EA14 12"/80# 5-35# ADJ DIFF is a medium to heavy duty unit with a cast iron base and cast iron platens. Features include an auto-eject, cast iron both sides work surface, 125 PSI hydraulic system for faster thermostat response time, a poly insulated cabinet CSA approved for a clean, safe work environment, and a quick change threaded cylinder to easily adjust the pressure settings. The Johnson Controls P170EA-14 , Inc. P170EA14 12"/80# 5-35# AD

The Johnson Controls® P170EA14 is a 12"/80# 5-35# adjustable differential pressure controller that is designed for use with medium temperature, electrostatic precipitator (ESP) collection equipment. It features rapid pressure decay at start-up and rapid pressure decay to pre-set during shutdown, which allows the device to perform effectively in applications where the stack gas temperature changes, or where large variations occur in duct diameter or flow rates.

The Johnson Controls P170EA-14 electric hydraulic pump is designed for a variety of flow control and pressure assisting applications. Continuously adjustable from 5/35 psi, this pump delivers flow up to 80 GPM at 14" H20 with a maximum discharge pressure of 35 psi.

The Johnson Controls PAC14 ($45) is the single-speed, positive pressure fan. It is equipped with an automatic blower rotor which converts low or high to medium and low. Provides quiet and efficient air circulation and temperature control. Adjust to high, medium and low speeds with a convenient control knob located on the front of the housing.

The Inverter compressor compressor technology provides a consistent airflow and temperature. This makes the equipment quieter and more energy efficient. The electronic display delivers full temperature control from 60° to 110°F to within +/- 3°F. An additional factory-installed option is available for temperature extension to 120°F.