Johnson Controls P266SNR-2 PressureTransducer 0-755#

PressureTransducer 0-755#

The Johnson Controls PressureTransducer 0-755# is a compact, economical way to measure and monitor the pressure on a steam system. This sensor has a 316 stainless steel base and a 316L stainless steel process tube that is internally ventilated for protection against corrosion. With a diameter of 2.4'' and a length of 8.5'', this product features automatic temperature compensation as well as low temperature limit, selfcalibration function, and temperature display using LED lights.

The PressureTransducer 0-755# acts as a pressure-to-voltage converter. It is calibrated for use with the CX5000 Controller to provide output at 4-20 mA based upon supply pressure. It provides an output voltage proportional to the reference pressure in psig. The specific accuracy of this transducer is 0.262 % FS in psi at 20° C (68° F).

Compact, high resolution, stand-alone pressure transducer with selectable repeatability, linearity, zero reference and span adjustment. The PressureTransducer 0-755# meets all the requirements of NIST for long-term traceable calibration to SI units. All sensors are manufactured under ISO9001 quality systems and undergo rigorous shock and overpressure tests at over 200% of rated working pressure. High accuracy (typical 0.3%) is achieved by integrating the patented FluidFlex compensating technology into the sensor design.

The P266SNR-2 is for use in HVAC/R pressure sensing applications. The PressureTransducer 0-755# is intended for installation into ductwork to measure airflows.

Keep your heat controller programed with the Johnson Controls 68-760 Pressure Transducer 0-755#. This precision instrument is designed to be installed in an outdoor unit to measure water temperature, enabling it to properly adjust for steam pressure.

Discover how our Johnson Controls PressureTransducer can save your business time and money. This pressure transducer is used for continuous measurement of pressure and temperature and has a maximum operating pressure connection 3,000 PSIG, 0-75"WC.

This Johnson Controls pressure transducer is an integral part of HVAC and commercial refrigeration systems and is designed to ensure that the correct pressure is sent to commercial and residential compressors.

This pressure transducer is designed to convert process air pressure to a precise analog voltage for precise instrumentation and control. It provides signal isolation from line pressure via a diaphragm and pressure seal, which helps conserve costly differential pressure and system air pressure. Proven Johnson Controls design and manufacturing, and 300 watt power module. Accuracy: 0.5% of Full Scale (FS) to 0.05% FS; Long-term stability: 0.05% of FS; Operating temperature: –5° to 70°C (23° to 158°F); Output: 4–20 mA or 2-

We are pleased to introduce the P266 series replacement pressure transducer, designed to fit into our Valves.

The PR266SNR will last as long as any product in its class, and it incorporates all the latest advances to give you the most stable and reliable gauges possible. The PR266SNR has a stainless-steel housing, a triple-corrosion-resistant coating and a smaller size than previous models. It has a large, easy-to-read screen and all of the features we've come to expect from Johnson Controls—a limited lifetime warranty, quick mounting and setup and a compact design that's ideal for tight spaces.

Johnson Controls delivers the power to match you engine and its safety—providing optimized, integrated systems for your business. And we can help you further extend fuel savings and maximize uptime with customized maintenance and asset management solutions: