Johnson Controls P499RCP-107 "0-750#1/4""PressureTransducer"

"0-750#1/4""PressureTransducer"

The Pressure Transducer is able to eliminate errors when pressure is applied via the pneumatic ports. The 0-750#1/4""PressureTransducer" is non-spirit level, which provides additional confidences in their readings. The Pressure Transducer gas sensor also has a filter that helps prevent dust build up.

The Johnson Controls P499RCP Series "0-750#1/4" Pressure Transducer screws into easily to the top of gasoline or diesel fuel tank, monitoring pressure within the fuel tank and ensuring that the farm equipment has an ample amount of fuel. This product is ideal for a restricted amount of mounting space and a need for a durable piece of equipment. Using a screw-in design makes it easy to install in a variety of situations.

Meet the Johnson Controls RCP 0-750#1/4"" Pressure Transducer. This pressure transducer features programmable output, switch selectable logging of high and low alarm set points, and is designed for use on multiple gases.

Pressure Transducer P499RCP-107, model number P499RCP-107, part number 530003215, is a Johnson Controls Pressure Transducer, 0-750 lbf/in² range.

The #1/4" Pressure Transducer with a silver scale and is most compatible with Johnson Controls products. The sensor can be used to measure any gases and liquids with a given pressure range. It adjusts the pressure automatically and displays the results in PSI or KPA on the LCD screen.

This two-wire, four-terminal, hook-up version of the standard P495S pressure transmitter applies 3 to 14 Vdc to the output terminals and thus requires no external power supply. The internal sensor is protected by a silicon diaphragm to ensure accurate operation over an extended period of time. The custom-molded epoxy housing seals tightly and provides excellent resistance to oil and solvents commonly found in industrial applications. Model P499RCP-107 has a flange that is compatible with 1/4"" pipe, part number 73110. The two terminal ports are spaced 22.2

The Johnson Controls P499RCP-107 is a Pressure Transducer that converts liquid or gas pressure into digital signals. It typically includes mounting hardware for its transmitter or sensor, cables, and any other accessories needed for its application. The Johnson Controls P499RCP-107 works on -34 to 140 degrees Farenheit (-36 to 60 degrees C). It's dimensions are 13"L x 10"W x 4"H.

This Delta Delta T Stat & Pressure Transducer monitors and controls temperatures within a system for heating and air conditioning. Its design and functionality is best suited for residential and small commercial applications. ----------------------------------------------------------------------------------------------------------

Take advantage of the Johnson Controls 48V 4-20mA output, RS485 communication bus interface and ability to daisy chain devices together. The C1860 pressure transmitter comes in a C-NPT, 2 Port B+C thread, and is capable of transmitting up to 1000 feet via CJ cable. Pros: Long distance communication bus interface for easy installation and wiring.

The Model P499 pressure transmitter conforms to the diameter, design and mounting provisions of CSA Specification W11.10.31, ANSI Specification B52.01 and IEC Standard 834-6. The P499 is a 4-20 mA output transmitter with a diaphragm/sleeve sensing principle, utilizing a lead zirconate titanate (PbZrTiO4 - PZT) strain gauge as the sensing element. The transmitted measurement signal is a function of diaphragm deflection under process pressure and is proportional to the pressure value sensed

The ultra compact, waterproof Johnson Controls pressure sensor P499RCP-107 is designed for an easy drop-in installation into the corrugated hose of a reciprocating compressor. With its simple 3-wire setup and NIST certified calibration, this sensor will provide high accuracy and low cost data logging. A green LED visible from the front and side indicates normal operation and a red LED indicates a problem.

Our range of pressure sensors are designed for applications where the measurement of differential pressure, absolute pressure or vacuum is required. Manufactured to the highest quality standards, these devices are ideal for use in many HVAC / Refrigeration / Process Control applications.