Johnson Controls P499RAP-102 PRESSURE TRANS 0-200 PSIG PRESSURE TRANS 0-200 PSIG

PRESSURE TRANS 0-200 PSIG

PRESSURE TRANS 0-200 PSIG Johnson Controls Unidrive SPX

The P499RAP-102 is a Johnson Controls Pressure Transducer designed to convert process pressure into a proportional electrical (I/P) signal for connection to a controller or indicator. The P499RAP-102 range is 0 to 200 PSIG. This transducer is compatible with Modbus RTU communication protocol and has 2 ports. The ports are selectable 4 - 20 mA and 0 - 5V DC. It has a response time of 0.004 sec and an absolute accuracy of +/- 1%. A 4-20 mA output with full scale range of 0-200 PSIG is included

The Johnson Controls P499RAP pressure transmitter is used to measure pressure up to 200 Psig.

Three-in-one pressure transducer, pressure regulator and backfill valve, used to control and monitor the oil level in a reciprocating compressor tank

Pressure Transmitters 0 to 400 PSI, Used to monitor and control process pressure in applications such as water heaters, HVAC & refrigeration systems, boilers and more, Key point zero change transmitter , Precision galvanic isolation of 1:1 million (30 mV), Can be used with four wire or three-wire systems , Stainless steel enclosure , Explosion proof models available

This three-element, single stage, make-up air pressure and temperature control has a maximum flow capacity of 43 ft 3 /min (120 m 3 /hr) with an internal static pressure of 0-200 psi (0-1379 kPa).

Johnson Controls P-499RA-102 Pressure Transmitter converts the pressure signal of a pneumatic gas supply into an electrical signal proportional to the input pressure. The PT-E range features NAMUR NE52 diaphragm and can be supplied with the cable of your preference.