ADD-ON STAGER MODULE 1-30fDIFF
Add-on Stager Module 1-30fDIFF
This STAGER MODULE provides 1 to 30 degree Fahrenheit temperature control stage with a differential of ±20 degrees Fahrenheit. The blade terminals are spaced 1/2 inch (12.7mm) and the terminal block accepts 12 AWG wire.
The Johnson Controls S350AA-1 Temperature Stage Module SPDT Relay Output 1 to 30 deg F Adj Diff 120/240Vac into its single stage or two stage control system, an air conditioning unit can be controlled by programmable logic controller. The Johnson controls temperature stage module is fully encapsulated and withstands wide ranging electrical environments.
The S350AA1-1 is a compact shell and mountable free standing Device Temperature Stage Module; and with mounting plate contains SPDT Relay Output, 1 to 30 deg F Adjustable Differential (when in comparison to reference temperature), 120/240 VAC Power Supply Voltage at 50/60 Hz. This module can be added to the 3479B-Series or 3490B-Series for applications requiring precise differential temperature control.
The Johnson Controls S350AA-1 Temperature Stage Module SPDT Relay Output Module is a spdt relay output stage module. It has an output of 1 to 30 degrees Fahrenheit. The input voltage of this module is 120/240VAC and its power loss is less than 5mW. This module comes with its own power cord. The temperature range of this system is 50(+/-5) up to 180(+/-5). We provide a one year warranty on this product.
The S350AA-1 stage module is a spdt relay output device for Johnson Controls' line of S350 Temperature Controllers. This module will allow the end-user to increase or decrease temperature with a set point of 1C (30F) below the current set point. At this stage, as a Stage Module, the output relay must have a load attached at all times and cannot be used alone.
S350AA-1 Relay output module stages up to 30 deg F when used with any of the following Johnson Controls temperature controllers:
Free Shipping
In stock
