PENN SEAT REPAIR KIT
PENN Seat Repair Kits are available in a wide variety of sizes and materials, with screw sizes to match. Kits contain all parts necessary for rebuilding the valve seats. Expect 2-3 days for delivery. Contact Johnson Controls for additional information and availability on items not listed: www.johnsoncontrols.com/contactus or (937) 433-9790
The original seat washer, the PENN KIT, is designed to correct seat wear on small engines without disassembly. The 2" kit is for use with model numbers beginning with 18, 20, 46, 50, 52, 53 and 60. The 2' kit with an 18-spline reamer with a removal punch is designed to work with cast iron cylinder heads. .
Durable and replacing worn valves that leak, this valve seat repair kit helps keep storage tanks free of pollutants. Required to renew equipment permits, the kit helps OEM installation personnel replace faulty seals and gaskets to meet code requirements and improve storage tank performance. This Penn Valve & Seat Repair Kit is an essential tool for contractors and farmers.
This valve seat repair kit comes with everything you need to completely renew the valve seats in a PENN 45 or 202 2-inch ball valve.
Valve Seat Repair Kit For Penn V4 Inlet Check Valve In PEX & Copper Tubing This is a direct replacement for use with Lay-In or Outside Inside branch, 12 inches Long , Clear Silicone
This repair kit is to repair valve seats for the following applications: 1-3/4in V1 through V16 cast steel valves. 2in V4 cast iron valves. VALVE SEAT RENEWAL KIT
This is a new aftermarket replacement value seat repair kit to fit the Johnson Controls 2" Valve. Please note, this kit can be used as a renewal of an existing valve or for repairs on valves that have been opened. This replacement valve seat repair kit includes everything needed to renew a 2" vertical lift butterfly valve including valve body, rod, plunger, spring and multiple seats.
This valve seat repair kit is specifically designed to renew two water control valves for Johnson Controls' Series 1139 and Series 1140 manufactured prior to the mid-1980s.
Kit for repairing Reguline PV4, PVR4, PSA4 and SLI4 valve seats in process industries. Kit contains (1) drum of 100% Silicone rubber elastomeric composition, (1) 8oz bottle of alkaline primer-activator; (1) 5oz bottle of hardener activator; (1) 2oz bottle of lubricant/wetting agent; (15) brushes; (10) abrasive screens.
The Johnson Controls STT18A-600R Valve Seat Rep. Kit is used to renew the valve seats in the instrument gauging cock located in the feed line to the steam generator or into the pressure gauge case.
Designed to rejuvenate and restore your outdated valves in minutes.
Free Shipping
In stock
